In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenaid Electric Slide-In Range Left Warming Drawer Rail Replacement #W11131365 
Kitchenaid Electric Slide-In Range Left Warming Drawer Rail Replacement #W11131365
Skill Level
Total Parts Cost
$134.55Estimated Savings
$112.5002:11
- Description
This video provides step-by-step instructions for replacing the left warming drawer slide rail on a Kitchenaid electric slide-in range (model #KSEB900ESS2). The most common reason for replacing the rail is if the drawer will not open or close properly.
All of the information in this rail replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this rail replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step By Step Instructions
1
KitchenAid Electric Slide-In Range - KSEB900ESS2
2
Electric Range Left Warming Drawer Slide Rail Replacement
3
Tools needed: pliers, flat-head screwdriver
4
Shock
5
Be sure to unplug the power cord or shut off the power supply.
6
Pull out the warming drawer and remove the rack.
7
Sharp
8
Next, use pliers to bend the slide rails outward to fully detach the drawer assembly ? this may require some effort.
9
Use a flat-head screwdriver to help pry the slide rail away from the frame then lift the rail up and move it inward to fully detach.
10
Install the new slide rail by inserting the rear tab in the slot and push the rail down to lock it into place.
11
With both slide rails pulled out, align the slots in the drawer assembly with the tabs on the slide rails and snap the assembly into position.
12
Plug the power cord back in or restore the power supply and the electric range should be ready for use.
Description
This video provides step-by-step instructions for replacing the left warming drawer slide rail on a Kitchenaid electric slide-in range (model #KSEB900ESS2). The most common reason for replacing the rail is if the drawer will not open or close properly.
All of the information in this rail replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this rail replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step-By-Step Instructions
1
KitchenAid Electric Slide-In Range - KSEB900ESS2
2
Electric Range Left Warming Drawer Slide Rail Replacement
3
Tools needed: pliers, flat-head screwdriver
4
Shock
5
Be sure to unplug the power cord or shut off the power supply.
6
Pull out the warming drawer and remove the rack.
7
Sharp
8
Next, use pliers to bend the slide rails outward to fully detach the drawer assembly ? this may require some effort.
9
Use a flat-head screwdriver to help pry the slide rail away from the frame then lift the rail up and move it inward to fully detach.
10
Install the new slide rail by inserting the rear tab in the slot and push the rail down to lock it into place.
11
With both slide rails pulled out, align the slots in the drawer assembly with the tabs on the slide rails and snap the assembly into position.
12
Plug the power cord back in or restore the power supply and the electric range should be ready for use.
Applicable Product Model
Parts Needed
Drawer Slide Rail
$134.55
Recommended Tools and Accessories
Cooktop Cleaner
$14.19
Total$0.00
Related Articles & Videos
04:14
Part Replacement
Kitchenaid Electric Slide-In Range Oven Bake Element Replacement #W10779716
08:20
Part Replacement
Kitchenaid Electric Slide-In Range Control Board Replacement #W11128223
05:55
Part Replacement
Kitchenaid Electric Slide-In Range Cooling Fan Replacement #W11107275
05:26
Part Replacement
Kitchenaid Electric Slide-In Range Left Front Radiant Surface Element Replacement #WPW10187839
04:04
Part Replacement
Kitchenaid Electric Slide-In Range Convection Fan Assembly Replacement #W11093167