In-stock parts ship the same dayAmana Dryer LE2812 P7804816W Parts
Factory-certified, genuine OEM Amana Dryer LE2812 P7804816W parts. All in-stock repair parts and accessories ship the same day.
Dryer gas burner valve solenoid set. If the dryer does not heat or heats intermittently the coils could be defective. To test, watch the burner and if the igniter glows for a while and then shuts off without the gas igniting, it usually means one of these coils is bad.
Gas dryer sensor for igniter and flame. The sensor is located across from the gas igniter at the dryer’s burner assembly. This flame sensor should be closed for continuity at room temperature. Check for continuity with a multi-meter before replacing.
Igniter (Bracket is no longer included.) If your old igniter was round you will need to order the bracket in the related parts below.
Screw, 10-16 x 5/16"
Gas line. 4' stainless gas dryer connector, (1) 3/8" and (1) 1/2" fitting, (1) extra 3/4" fitting, pipe thread sealant, leak test solution, and installation instructions.
1/4 Inch hex head screw
This is a genuine replacement part. Whirlpool 489P3 Thermostat.
Microcomputer assembly
Heater duct assembly
