Amana Refrigerator ARB2517CSR-PARB2517CS1 Parts

Refrigerator pantry drawer endcaps for right and left side *Install both end caps to complete repair

Light/Fan switch, 3 terminal. Some diagrams are wrong. Please see related kit if appliance has a difference style of switch.

Refrigerator icemaker assembly, modular style. The new icemaker does not include a new cover, ice level arm, or wire harness, these components will need to be reused from original icemaker.

Pantry drawer front, measures 30-1/2 inches long. If your current cover is 28-3/16 inches long, please see the related item.

Refrigerator/freezer compressor start device and capacitor. The start device and capacitor provides a boost of power to the compressor during start-up. If the start capacitor isn’t working, the compressor may not start.

Light socket

Support wheel. 1 inch thick. 1-3/4 in diameter.

Evaporator Fan Blade

1/4 inch plastic water line kit, approximately 72 inches. Tubing will need to be cut to match existing length.

Crisper drawer

Motor, freezer (evaporator) fan

Freezer door gasket, black. 23 x 34-3/4 inches

Humidity control slide

The Whirlpool Condenser Fan Motor 833697 cools hot refrigerant before it enters the evaporator. It includes hardware and instructions, is rated at 115v, 2 watts, and has a clockwise rotation. Use safety equipment and disconnecting utilities are recommended before any service or repair.

Power cord assembly with two wire connector. *Per factory this new cord may need to be spliced onto refrigerator wire harness with wire nuts.