Price Match GuaranteeGE Dryer DPVH890GJ2MV Parts
Shop replacement repair parts for GE Dryer model DPVH890GJ2MV
Dryer drum slide. There are two of these needed on your dryer. These go on the outer most slots on the front bearing. Sold as pack of two. The drum slides support the front of the dryer drum instead of rollers or bearings. As they wear out the dryer will make more noise.
Dryer drum slide (2 pack). There are two of these needed on your dryer. These go on the inner most slots on the front bearing. The drum slides support the front of the dryer drum instead of rollers or bearings. As they wear out the dryer will make more noise.
Rear drum bearing sleeve
Light bulb, 120V, 10W
Idler pulley wheel, plastic
High-limit thermostat for dryer. L315-65. If the dryer overheats, this high-limit thermostat will cut off the power to the drive motor. If the high-limit thermostat has blown, the dryer won't start.
Door switch
Inlet control thermistor. Resistence reading should be around 100K ohms at room temperature and decrease with temperature rise.
Thermostat, high limit
O-Ring for retaining drum bearing sleeve on shaft
Screw #10
Dryer door catch kit
Drum support shaft and bearing assembly
Door strike
Flame sensor at side of burner tube
Frequently Purchased Together For This Model
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic