In-stock parts ship the same dayMaytag Dryer SDG3606AWW Parts
Factory-certified, genuine OEM Maytag Dryer SDG3606AWW parts. All in-stock repair parts and accessories ship the same day.
Dryer gas burner valve solenoid set. If the dryer does not heat or heats intermittently the coils could be defective. To test, watch the burner and if the igniter glows for a while and then shuts off without the gas igniting, it usually means one of these coils is bad.
Dryer drum drive belt
Dryer drum support roller
Gas dryer sensor for igniter and flame. The sensor is located across from the gas igniter at the dryer’s burner assembly. This flame sensor should be closed for continuity at room temperature. Check for continuity with a multi-meter before replacing.
Thermal Fuse
Three terminal door switch kit. Be aware that this switch replaces older 2 terminal switches.
Idler pulley wheel and bearing assembly. The idler pulley puts tension on the drive belt. If the idler pulley fails to put the proper amount of tension on the belt, the dryer will not spin.
Drum drive motor
Dryer door latch & catch kit
The Whirlpool Blower Wheel 56000 is a high-quality replacement part that attaches to the drive motor shaft and blows air through the drum and out through the exhaust vent. It replaces several part numbers and caution should be taken when servicing or repairing the appliance.
Drum Felt Seal
Dryer heating element. If the dryer does not heat check for a blown thermal fuse or thermal cut out. Heating elements will often have a break in the coil element if defective.
Light bulb, 7 Watt
Door catch kit, includes catch and clip (metal) Replace both parts for best results
