Shop replacement repair parts for Trane Furnace model TUC100C948B7

Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.

Stainless steel burner

HSI control module with four wire leads The HSIcontrol module regulates the supply of power to the furnace components. Be sure to check more commonly defective parts before replacing the control board.

Thermal limit switch, open at 180 degrees, close at 150 degrees

Hot surface furnace ignitor with plug on connector

Gas Valve Assembly
Please see related items for gas valve adapter kit

Transformer; 115v pri, 24v sec., 60hz, 35va, foot mount

Capacitor; 440 vac oval motor run, 15 mfd

Transition receptacle, includes four mounting screws

Door switch, 21 amps, 125/250 vac

Draft inducer motor, one stage with shaded pole motor *Note: All models use this part with the exception of: *UX/DX100A, UX/DX100C, UX/DX1C100, UX1D100, UX/DX120A, UX/DX120C. These select models use item 2458691.

1/2HP 115Volts 60Hz 9.35 amp 1075 RPM's 4 Speed Open Enclosure 48Y Frame Single Phase CCW 3" Shaft

10 in diameter x 10 in width. .50 BC. Clockwise rotation

Resilient ring, 2 required

Brass orifice spud, drill #45