Toro Lawn Mower 20332/SERIAL: 310000001-310999999 Parts

Briggs & Stratton Original Equipment 498260 Carburetor Overhaul Kit. If the carburetor is clogged, the engine won't get enough fuel. As a result, the engine may not start or may run poorly.

Small engine recoil starter assembly. This item includes the pulley and spring. The recoil starter engages the drive cup on the flywheel to start the engine when pulled.

Replacement Briggs & Stratton fuel line kit with clamps. 1/4 Inch inside diameter, Cut to length.

Nylon insert locking nut. Used as part of the shear bolt assembly, as well as other locations within the equipment.

Genuine Toro 131-4547-03 Mulching/Recycling Lawn Mower Blade. Fits Toro walk-behind lawn mower with a 22-inch deck.

Briggs & Stratton recoil starter kit. The recoil starter engages the drive cup on the flywheel to start the engine. If the recoil starter is defective, the engine may not start.

Ignition coil. The ignition coil sends voltage to the spark plug while the engine is running. If the ignition coil is defective, the engine may not start. If your engine was built before date code 101230xx, you will need to order a new Governor Arm see Related Items below.

Small engine carburetor bowl gasket.

Cap-fuel tank

Briggs & Stratton carburetor primer bulb. The primer bulb draws fuel into the carburetor to make the engine easier to start.

Clamp-hose

Carburetor needle & seat kit. Comes with installation instructions. The float needle allows fuel to enter the float bowl. If the float needle is stuck closed, the engine will not get fuel and thus will not start.

Wheel drive belt. Width: 3/8 " Length: 33 1/4 "

Chute-discharge, side

Toro lawn mower wheel bearing. We recommend replacing the bearing and retainer together.