Shop replacement repair parts for Poulan Chainsaw model P3314/TYPE 1

Fuel line (Large). The fuel line allows fuel to travel from the fuel tank to the carburetor and from the primer bulb to the fuel system.

Chainsaw fuel cap with retainer

Champion Spark Plug (RCJ7Y). The spark plug ignites the fuel and air mixture in the engine's cylinder to power the engine. If the spark plug is has fouled (if the tip of the spark plug is burnt or damaged), the engine may not start or may run rough.

Chainsaw carburetor. If the carburetor is clogged, the engine won't get enough fuel. As a result, the engine may not start or may run rough. The carburetor can often be cleaned or rebuilt, but sometimes it may need to be replaced.

Primer bulb (or purge bulb) assembly. The primer bulb draws fuel into the carburetor to make the engine easier to start. The short port on the primer bulb is the inlet. The longer port is the outlet back to the fuel tank.

Kit-bar adjustment screw

Starter Spring * This is the spring for the retraction of the rope**Not for the easy start system***

Chainsaw clutch drum assembly. When the engine's speed increases, the clutch engages the clutch drum and gear to drive the chain. If the chain isn't turning, the clutch drum may be defective.

Rope for pull starter

Husqvarna chainsaw air filter. If the air filter is clogged or dirty, the engine may not start or may run rough.

Starter pulley

Handguard

Kit chain brake sas

Husqvarna bar mounting nut.

Clutch