In-stock parts ship the same day
W10779716 Range/Stove/Oven Bake Element
This part W10779716 is compatible with:
- Product Type:
- Range/Stove/Oven
How to Replace Bake Element W10779716
Step 1 of 14Disconnect Power to the Range
For your safety, unplug the power cord from the wall outlet before beginning any repairs. This is a critical first step to prevent electrical shock.
Remove the Lower Rear Access Panel
Move to the back of the range. Use a Phillips head screwdriver to unthread the screws securing the lower rear access panel. Once the screws are out, pull the panel down to remove it. Be careful, as the metal edges can be sharp.
Disconnect the Bake Element Wires
Locate the two wires connected to the bake element's terminals. Firmly grip the connectors and pull them off the terminals to disconnect them.
Remove the Oven Racks
Open the oven door and slide both oven racks out of the appliance to clear the workspace.
Remove the Oven's Bottom Panel
Using a Phillips head screwdriver, remove the two mounting screws that secure the oven's bottom panel. Lift the panel up from the back and push it forward to detach it, then remove it from the oven cavity.
Unscrew and Remove the Old Bake Element
Unscrew the single screw holding the bake element to the rear interior panel. Next, unthread the two screws securing the front mounting bracket. With all screws removed, you can now pull the old element out of the oven.
Install the New Bake Element
Position the new bake element inside the oven. Insert the terminals through the holes in the rear panel. Secure the front mounting bracket with its two screws, then re-thread the screw at the rear to fully secure the element.
Reinstall the Oven's Bottom Panel
To reinstall the bottom panel, insert its front edge into position first. Then, lower the back of the panel until it rests flat on the oven floor.
Secure the Bottom Panel
Re-thread the two mounting screws at the rear of the bottom panel and tighten them to secure it in place.
Replace the Oven Racks
Slide both oven racks back into their positions inside the oven and close the door.
Reconnect Wires to the New Element
Return to the back of the range. Firmly push the wire connectors onto the terminals of the new bake element until they are fully seated.
Reinstall the Lower Rear Access Panel
Align the lower rear access panel by inserting the tabs on the panel into the slots on the range frame. Push the panel up into place. Remember to be cautious of sharp edges.
Secure the Rear Access Panel
Re-thread and tighten all the screws to secure the lower rear access panel.
Plug in the Range
With the repair completed, plug the power cord back into the wall outlet. Your range should now be ready for use.
Related Articles & Videos
Bake Element Customer Reviews
Common Problems Fixed by the Bake Element
Based on customer reports and repair data, this part commonly fixes these issues:
Oven doesn't bake evenly
Oven temperature not accurate
Oven burning food
Oven not heating
Oven won't turn off
Range is producing a burning smell
Wall oven is producing a burning smell
Range making a loud noise
Oven won't turn on
About the Bake Element
If the bake element is burned out, the oven will only be heated by the broil element. This will cause the oven to heat unevenly. When the bake element is heating properly, it glows red hot. If the element does not glow red, this indicates that the element is not heating. Often, if the element has burned out, it will be visibly damaged. Inspect the bake element for holes or blisters. To determine if the bake element has burned out, use a multimeter to test the element for continuity. If the bake element does not have continuity, replace it..