Heating Element Parts

Dryer electric heating element assembly

Bake element assembly with support brackets

The Frigidaire Bake Element is a high quality replacement part for electric ovens on ranges. It is located at the bottom of the oven and supplies heat for baking. It replaces several part numbers

Dryer heating element assembly. If the dryer does not heat the thermal fuse should be checked before replacing the heating element. Normally, the element will have a break in the coil if defective.

Dishwasher heating element kit. If the dishwasher isn't drying the dishes properly, the heating element may have burned out

Dryer Heating element. If the dryer does not heat check for a blown thermal fuse or thermal cut out. Heating elements will often have a break in the coil element if defective.

Oven bake element. If the oven won't heat, the bake element may have burned out. Often, if the bake element has burned out, it will be visibly damaged. Inspect the bake element for holes or blisters.

Dryer heating element. If the dryer no longer heats then the heating element may have failed, but it is not the most common cause. The most common cause for a dryer to stop heating is a blown thermal fuse.

Heating Element

Oven bake heating element for lower oven. The terminals are male quarter inch spade connectors. The wires push onto the heating elements connectors. If the oven does not bake then the element could have burned out.

Dishwasher heating element

Dual radiant surface element, 9 inches/6 inches, 3000 watts

Oven bake heating element

8 Inch electric coil surface element with looped terminals, 2600 watts. 5 turns

Oven bake element with push-on terminal ends. It is not unusual for a bake element to short out and arc in one spot. If this occurs, disconnect the power to the stove until the element has been replaced.