Igniter Parts

The Frigidaire Oven Burner Igniter 5303935066 is a high-quality replacement part that ignites the gas to light the oven burner. It includes 2 ceramic wire connectors and replaces multiple part numbers

Oven igniter with long wire harness. The igniter draws electrical current through the oven safety valve to open it. If the igniter glows for more than 90 seconds without igniting the gas flame, this indicates that the igniter is too weak to open the valve.

The Whirlpool Burner Igniter Kit 279311 is a high-quality replacement part that ignites gas to light the dryer burner. It replaces multiple igniters and requires safety precautions and disconnection from utilities before installation.

The GE Appliances Burner Igniter WB13K21 is a high-quality replacement part that ignites the gas to light the oven burner. It comes with 2 ceramic wire connectors and replaces multiple part numbers

Oven igniter. The igniter draws electrical current through the oven safety valve to open it. If the igniter glows for more than 90 seconds without igniting the gas flame, this indicates that the igniter is too weak to open the valve.

Oven igniter with wire harness

Bake or Broil Igniter. Match up the connector with old part. The plastic connector is male.

Oven BAKE burner spark electrode, gas oven with Direct Spark Ignition (DSI)

Oven igniter

The Whirlpool Burner Igniter 74007498 replaces several part numbers. Replaces both bake and broil ignitors depending on the model. Safety precautions and professional assistance may be necessary for repairs.

Oven bake or broil burner igniter. If the oven does not heat check if the igniter is glowing. If so, it is likely weak and should be replaced. A defective igniter is the most common cause for a gas oven to not heat.

Nitride Hot Surface Furnace Ignitor

The Whirlpool Brands Burner Igniter 12400035 is a high-quality replacement for most flat oven igniters. It does not replace round igniters or those with blue ceramic. It replaces multiple part numbers. Disconnect the appliance from all utilities prior to installation.

Oven igniter with wire connector

Oven bake or broil igniter, 2.5 to 3.0 Amp. The igniter draws electrical current through the oven safety valve to open it. If the igniter glows for more than 90 seconds without igniting the gas flame, this indicates that the igniter is too weak to open the valve. (NOTE: This part is very fragile.)