Amana Ice Maker in Refrigerator Compartment Not Working
If the ice maker in your refrigerator compartment is not working, the most likely culprit is the water inlet valve, which needs about 20 psi and a proper electrical feed to fill the mold. After checking water pressure, use a multimeter to confirm the valve is getting power before replacing it. Next most common causes are the dispenser solenoid or dispenser door motor; if the door flap or actuator pin won’t move the solenoid or motor will prevent ice from dispensing even when the ice maker itself is making ice. A failed fan motor in the ice maker compartment can also stop production by letting temperatures rise, so check that the fan runs and test it for continuity. Finally, inspect the dispenser funnel guide and chute for jams or damage that block ice. These are the typical service points for ice maker not making ice or refrigerator not making ice problems, and basic multimeter checks will tell you which part to replace. Enter your model number on RepairClinic.com to find the exact replacement part for your refrigerator and get step-by-step parts and repair help.
01 - Amana Refrigerator Motor
The refrigerator ice maker compartment fan motor assists in keeping the air temperature in the compartment cold enough for the ice maker to make ice. If the fan motor has failed and isn't running, the temperature will rise high enough that the ice maker will be unable to make ice. The fan motor can be inspected to see if it's running when the ice maker should be working. The component can also be tested for electrical continuity to help determine if it's faulty. A faulty fan motor will need to be replaced.
Enter model number to search for the required part specific to your product
The refrigerator ice maker compartment fan motor assists in keeping the air temperature in the compartment cold enough for the ice maker to make ice. If the fan motor has failed and isn't running, the temperature will rise high enough that the ice maker will be unable to make ice. The fan motor can be inspected to see if it's running when the ice maker should be working. The component can also be tested for electrical continuity to help determine if it's faulty. A faulty fan motor will need to be replaced.
The dispenser funnel guide is the component that allows the ice from the ice maker to be properly dispensed. If the guide is obstructed or broken, the ice may not dispense as expected. Inspect the funnel guide or any obstruction or damage and replace if necessary.
The water inlet valve is an electrically-controlled valve that opens to supply water to the dispenser and ice maker. If the water inlet valve is defective, or if it has insufficient pressure, it won’t allow water to flow through. As a result, the ice maker won’t make ice. The valve requires at least 20 psi to function properly. Make sure that the water pressure to the valve is at least 20 psi. If the water pressure is sufficient, use a multimeter to check for power to the water inlet valve. If the water inlet valve has sufficient pressure and is getting power, but the ice maker won’t fill with water to make ice, replace th...e water inlet valve.
The dispenser door motor opens and closes the dispenser door to prevent cold air from escaping the refrigerator. If the dispenser door motor is defective, the dispenser door won’t open. As a result, the dispenser will not dispense ice. To determine if the motor is defective, first determine if the motor is getting power. If the motor is getting power, but it won’t run, replace it. You can use a multimeter to test the motor for continuity. If the dispenser door motor does not have continuity, replace it.
The dispenser solenoid opens a door flap to release the ice and then closes the door flap once the dispenser finishes dispensing ice. If the dispenser solenoid is defective, the dispenser door won’t open. To determine if the dispenser door solenoid is defective, use a multimeter to test it for continuity. In addition, check the dispenser actuator pin to ensure that it moves freely. If the dispenser door solenoid does not have continuity, or if the actuator pin does not move freely, replace the dispenser solenoid.
The home may have insufficient water pressure. The water inlet valve supplies water to the ice maker and must have strong water pressure to work properly. You can check the water flow at the kitchen faucet to help determine if the home's water pressure is sufficient or not.
Common
Frequently Asked Questions
Why is my ice maker not making ice?
Fridge water dispenser not working — what should I check?
Ice won't dispense even though the ice maker is full
My ice maker stopped making ice because the compartment is warm — could a fan be the issue?
How do I find the correct replacement part on RepairClinic.com for my refrigerator?