In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Dryer Backsplash Rear Panel Replacement WE20X24556
This video provides step-by-step repair instructions for replacing the backsplash rear panel on a GE dryer (Model GTD42EASJ2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with dryer-
Don't forget to like and comment on this video and subscribe to our channel!
GE Dryer Backsplash Rear Panel Replacement WE20X24556
Total Parts Cost
$NaN02:36
- Description
This video provides step-by-step repair instructions for replacing the backsplash rear panel on a GE dryer (Model GTD42EASJ2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with dryer-
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
To replace the backsplash rear panel on your ge dryer, you will need a drill driver with a 1/4” bit.
2
Before you begin the procedure, unplug the power to the appliance.
3
Unthread the five screws on the panel. any missing screws can be ordered through the links in the description below.
4
Pull out and lift the panel from the backsplash.
5
Unthread the ground screw.
6
Carefully remove the wiring diagram from the panel.
7
To install the new rear panel, attach the wiring diagram to the inside of the panel.
8
Rethread the ground screw.
9
Insert the panel tabs into the slots on the dryer.
10
Rethread the five screws.
11
Plug in the dryer, and your washer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the backsplash rear panel on a GE dryer (Model GTD42EASJ2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with dryer-
Don't forget to like and comment on this video and subscribe to our channel!
This video provides step-by-step repair instructions for replacing the backsplash rear panel on a GE dryer (Model GTD42EASJ2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with dryer-
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
To replace the backsplash rear panel on your ge dryer, you will need a drill driver with a 1/4” bit.
2
Before you begin the procedure, unplug the power to the appliance.
3
Unthread the five screws on the panel. any missing screws can be ordered through the links in the description below.
4
Pull out and lift the panel from the backsplash.
5
Unthread the ground screw.
6
Carefully remove the wiring diagram from the panel.
7
To install the new rear panel, attach the wiring diagram to the inside of the panel.
8
Rethread the ground screw.
9
Insert the panel tabs into the slots on the dryer.
10
Rethread the five screws.
11
Plug in the dryer, and your washer should be ready for use.
Applicable Product Model
Related Articles & Videos