In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Dryer Timer Resistor Replacement WE4M255
This video provides step-by-step repair instructions for replacing the timer resistor in a GE dryer (Model GTD42EASJ2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with dryer-
Don't forget to like and comment on this video and subscribe to our channel!
GE Dryer Timer Resistor Replacement WE4M255
03:31
- Description
This video provides step-by-step repair instructions for replacing the timer resistor in a GE dryer (Model GTD42EASJ2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with dryer-
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
To replace the timer resistor in your ge dryer, you will need a drill driver with a 1/4” bit and needlenose pliers.
2
Before you begin the procedure, unplug the power to the appliance.
3
Unthread the five screws on the panel.any missing screws can be ordered through the links in the description below.
4
Pull out and lift the panel from the backsplash.
5
Detatch the ground wire.
6
Unthread the two screws that secure the backsplash.
7
Pull the backsplash back, and lift up to free it from the dryer.
8
Note the orientation of the white and brown wires and then remove them.
9
Unthread the screw securing the resistor.
10
To install the new timer resistor…
11
Set the resistor into position and rethread the screw.
12
Reattach the white and brown wires.
13
Set the backsplash back into the dryer slots and push forward to lock in place.
14
Rethread the two screws.
15
Reattach the ground wire to the panel.
16
Insert the panel tabs into the slots on the dryer.
17
Rethread the five screws.
18
Plug in the dryer, and your dryer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the timer resistor in a GE dryer (Model GTD42EASJ2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with dryer-
Don't forget to like and comment on this video and subscribe to our channel!
This video provides step-by-step repair instructions for replacing the timer resistor in a GE dryer (Model GTD42EASJ2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with dryer-
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
To replace the timer resistor in your ge dryer, you will need a drill driver with a 1/4” bit and needlenose pliers.
2
Before you begin the procedure, unplug the power to the appliance.
3
Unthread the five screws on the panel.any missing screws can be ordered through the links in the description below.
4
Pull out and lift the panel from the backsplash.
5
Detatch the ground wire.
6
Unthread the two screws that secure the backsplash.
7
Pull the backsplash back, and lift up to free it from the dryer.
8
Note the orientation of the white and brown wires and then remove them.
9
Unthread the screw securing the resistor.
10
To install the new timer resistor…
11
Set the resistor into position and rethread the screw.
12
Reattach the white and brown wires.
13
Set the backsplash back into the dryer slots and push forward to lock in place.
14
Rethread the two screws.
15
Reattach the ground wire to the panel.
16
Insert the panel tabs into the slots on the dryer.
17
Rethread the five screws.
18
Plug in the dryer, and your dryer should be ready for use.
Applicable Product Model
Related Articles & Videos