In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenAid Refrigerator Main Control Board Replacement W11224256 
This video provides step-by-step repair instructions for replacing the main control board on a KitchenAid Refrigerator (Model KRFF507HPS02). The most common reason for replacing this part is if the refrigerator will not work at all.
All of the information for this video is applicable to the following brands: KitchenAid
KitchenAid Refrigerator Main Control Board Replacement W11224256
Skill Level
Total Parts Cost
$332.65Estimated Savings
$112.5004:13
- Description
This video provides step-by-step repair instructions for replacing the main control board on a KitchenAid Refrigerator (Model KRFF507HPS02). The most common reason for replacing this part is if the refrigerator will not work at all.
All of the information for this video is applicable to the following brands: KitchenAid
Step By Step Instructions
1
To replace the main control board in this kitchenaid refrigerator, you will need a quarter-inch nut driver, a quarter-inch wrench, and a small flat-head screwdriver.
2
Before you begin the procedure, unplug the appliance’s power cord.
3
To move the refrigerator away from the wall, first open the freezer drawer and pull the toe kick plate forward to remove.
4
Now use the quarter-inch wrench to rotate the brake feet counter-clockwise to raise them.
5
(sfx: warning chime)
6
You can now roll the appliance forward.
7
Use the quarter-inch nut driver to unthread the four screws securing the control board access panel.
8
Set the panel aside.
9
Peel back the tape and use the small flat-head screwdriver to release the retaining tab to detach the plastic cover.
10
Depress the tab to release the main control board.
11
Note the orientation of the wire connecters connected to the board, then disconnect them.
12
To install the new main control board, first connect the wire connecters to the appropriate terminals on the board.
13
Position the left side of the new board behind the retaining tabs and snap the right side into place.
14
Snap the plastic cover into position and secure with the tape.
15
Reposition the access panel, and thread the screws to secure.
16
Push the refrigerator back against the wall, and lower the brake feet until they are in contact with the floor.
17
Replace the toe kick plate by aligning it on the lower frame and snapping it into place.
18
Plug the power cord back in, and the refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the main control board on a KitchenAid Refrigerator (Model KRFF507HPS02). The most common reason for replacing this part is if the refrigerator will not work at all.
All of the information for this video is applicable to the following brands: KitchenAid
This video provides step-by-step repair instructions for replacing the main control board on a KitchenAid Refrigerator (Model KRFF507HPS02). The most common reason for replacing this part is if the refrigerator will not work at all.
All of the information for this video is applicable to the following brands: KitchenAid
Step-By-Step Instructions
1
To replace the main control board in this kitchenaid refrigerator, you will need a quarter-inch nut driver, a quarter-inch wrench, and a small flat-head screwdriver.
2
Before you begin the procedure, unplug the appliance’s power cord.
3
To move the refrigerator away from the wall, first open the freezer drawer and pull the toe kick plate forward to remove.
4
Now use the quarter-inch wrench to rotate the brake feet counter-clockwise to raise them.
5
(sfx: warning chime)
6
You can now roll the appliance forward.
7
Use the quarter-inch nut driver to unthread the four screws securing the control board access panel.
8
Set the panel aside.
9
Peel back the tape and use the small flat-head screwdriver to release the retaining tab to detach the plastic cover.
10
Depress the tab to release the main control board.
11
Note the orientation of the wire connecters connected to the board, then disconnect them.
12
To install the new main control board, first connect the wire connecters to the appropriate terminals on the board.
13
Position the left side of the new board behind the retaining tabs and snap the right side into place.
14
Snap the plastic cover into position and secure with the tape.
15
Reposition the access panel, and thread the screws to secure.
16
Push the refrigerator back against the wall, and lower the brake feet until they are in contact with the floor.
17
Replace the toe kick plate by aligning it on the lower frame and snapping it into place.
18
Plug the power cord back in, and the refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Main Control Board
$332.65
Total$0.00
Related Articles & Videos
02:47
Part Replacement
KitchenAid Refrigerator Lower Freezer Drawer Replacement W10594047
10:40
Part Replacement
KitchenAid Refrigerator Evaporator Fan Motor Replacement W11224591
04:12
Part Replacement
KitchenAid Refrigerator Upper Access Panel LED Light Assembly Replacement W11484839