In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenaid Double Oven Electric Range Right Rear Surface Element Replacement #WP8273994 
Kitchenaid Double Oven Electric Range Right Rear Surface Element Replacement #WP8273994
Skill Level
Total Parts Cost
$152.36Estimated Savings
$112.5002:28
- Description
This video provides step-by-step instructions for replacing the right rear surface element on a Kitchenaid double oven electric range (model #KFED500ESS02). The most common reason for replacing the element is if it will not heat.
All of the information in this element replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this element replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step By Step Instructions
1
Before you replace a six inch surface Element in your range be sure to unplug the power cord.
2
Open the oven door and use a phillips-head screwdriver to unthread the two screws securing the main top.
3
Carefully lift up the top and move it to the side to detach it from the hinges.
4
Note the location of the surface element wires then disconnect them.
5
Use pliers to help release the element retaining clips and remove the old element.
6
Prepare the new surface element for installation by transferring the retaining clips from the old element to the new one.
7
Be sure to position the clips in the proper location.
8
Now insert the retaining clips into the slots and snap the element into place.
9
Connect the wires to the appropriate terminals.
10
Reinstall the main top by aligning the hinge pins on the hinges then lower the top.
11
Thread the screws to secure the top.
12
With the repair completed plug the power cord back in and your range should be ready for use.
Description
This video provides step-by-step instructions for replacing the right rear surface element on a Kitchenaid double oven electric range (model #KFED500ESS02). The most common reason for replacing the element is if it will not heat.
All of the information in this element replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this element replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step-By-Step Instructions
1
Before you replace a six inch surface Element in your range be sure to unplug the power cord.
2
Open the oven door and use a phillips-head screwdriver to unthread the two screws securing the main top.
3
Carefully lift up the top and move it to the side to detach it from the hinges.
4
Note the location of the surface element wires then disconnect them.
5
Use pliers to help release the element retaining clips and remove the old element.
6
Prepare the new surface element for installation by transferring the retaining clips from the old element to the new one.
7
Be sure to position the clips in the proper location.
8
Now insert the retaining clips into the slots and snap the element into place.
9
Connect the wires to the appropriate terminals.
10
Reinstall the main top by aligning the hinge pins on the hinges then lower the top.
11
Thread the screws to secure the top.
12
With the repair completed plug the power cord back in and your range should be ready for use.
Applicable Product Model
Parts Needed
Radiant Surface Element
$152.36
Recommended Tools and Accessories
Cooktop Cleaner
$14.19
Total$0.00
Related Articles & Videos
04:59
Part Replacement
Kitchenaid Electric Slide-In Range Right Rear Radiant Surface Element Replacement #WP8273994
06:57
Part Replacement
Kitchenaid Electric Downdraft Cooktop Element (1200W) Replacement #WP8273994