In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Range Hinge Bracket Replacement #W10647259
Whirlpool Range Hinge Bracket Replacement #W10647259
Skill Level
Total Parts Cost
$5.50Estimated Savings
$112.5002:19
- Description
This video provides step-by-step repair instructions for replacing the hinge bracket on a Whirlpool electric range. The most common reasons for replacing the hinge bracket are when the door won't open smoothly or close easily.
All of the information for this hinge bracket replacement video is applicable to the following brands:
Whirlpool
Tools needed: flat head screwdriver, phillips head screwdriver, wire with hook
All of the information for this hinge bracket replacement video is applicable to the following brands:
Whirlpool
Tools needed: flat head screwdriver, phillips head screwdriver, wire with hook
Step By Step Instructions
1
To replace a hinge bracket on your range first slide out the drawer and remove it.
2
Now use a small flat-head screwdriver to help lift up the hinge locks then remove the oven door from the frame.
3
Use a phillips-head screwdriver to unthread the two mounting screws securing the hinge bracket you’re replacing.
4
Reach into the frame to remove the old bracket.
5
To install the new hinge bracket insert a wire with a hook through the bracket hole in the frame.
6
With the long end of the new bracket facing up, hook the wire on the hinge hole.
7
Use the wire to pull the bracket up to the correct position so you can thread the two mounting screws to secure.
8
Reinstall the door by hooking the hinges onto the frame.
9
Flip the hinge locks down and close the door.
10
Replace the drawer and your range should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the hinge bracket on a Whirlpool electric range. The most common reasons for replacing the hinge bracket are when the door won't open smoothly or close easily.
All of the information for this hinge bracket replacement video is applicable to the following brands:
Whirlpool
Tools needed: flat head screwdriver, phillips head screwdriver, wire with hook
All of the information for this hinge bracket replacement video is applicable to the following brands:
Whirlpool
Tools needed: flat head screwdriver, phillips head screwdriver, wire with hook
Step-By-Step Instructions
1
To replace a hinge bracket on your range first slide out the drawer and remove it.
2
Now use a small flat-head screwdriver to help lift up the hinge locks then remove the oven door from the frame.
3
Use a phillips-head screwdriver to unthread the two mounting screws securing the hinge bracket you’re replacing.
4
Reach into the frame to remove the old bracket.
5
To install the new hinge bracket insert a wire with a hook through the bracket hole in the frame.
6
With the long end of the new bracket facing up, hook the wire on the hinge hole.
7
Use the wire to pull the bracket up to the correct position so you can thread the two mounting screws to secure.
8
Reinstall the door by hooking the hinges onto the frame.
9
Flip the hinge locks down and close the door.
10
Replace the drawer and your range should be ready for use.
Applicable Product Model
Related Articles & Videos
06:59
Part Replacement
Kitchenaid Electric Slide-In Range Hinge Receiver Replacement #W10647259