Shop replacement repair parts for Gibson Washing Machine model GTF1040FS3

Washer door strike. If the washing machine won't start, inpsect the actuator for damage. If the actuator is damaged the door will not latch properly and the washer will not turn on.

Door lock & switch assembly

Washing machine drain pump. On some models you will need to configure the replacement pump to match the old pumps outlet port direction and reuse the old mounting bracket. If the washer does not drain then the drain pump may be clogged, damaged, or defective.

Shock mounting pin

Washing machine shock absorber kit. The shock absorbers dampen the vibration of the washer tub. If one or more of the shock absorbers are worn out, the washer will vibrate or shake.

Leveling leg

Suspension spring

Washing machine inner tub drive belt, 6 ribs.

Screw, 10-16

Screw, pan head, 8-18b x 0.31

Washing machine drain hose. Hose is 7-1/2 feet (90 inches) long.

Door Boot Seal

Universal washing machine water supply hose set. Includes 2 extra strong 6 foot braided stainless steel hoses with hose washers already installed. It is recommended to replace washing machine inlet hoses after 5 years of use to reduce the risk of hose failure.

Water inlet valve

This is a genuine replacement part. Tub to Pump Hose 131784700 Frigidaire hose tube fitting