Shop replacement repair parts for Huskee Lawn Mower model 12A-B29Q731

Lawn mower adjustable upper handle.

Grass bag frame. If the grass bag is dragging on the ground, or the frame will not stay in position it may be broken or bent and will need to be replaced.

NGK spark plug. The spark plug ignites the fuel and air mixture in the cylinder to power the engine. If the spark plug is burnt, fouled or damaged the engine may not start or may run rough.

Honda air cleaner (or air filter). If the air filter is clogged or dirty, the engine may not start or may run rough.

Lawn mower discharge chute. Installing this chute will keep the mulch cover open to discharge the clippings out the side of the mower.

Lower handle bar. There are two sets of holes in the bar. The one closest to the flat end is used for shipping. You will use the mounting hole furthest away for normal use.

Rear trail shield

21" Lawn mower mulching blade with star. MTD Genuine Factory Part.

MTD flange lock-nut, 1/4-20.

Hinged mulch plug (or cover) for lawn mower. Note: Mounting screw is not pre threadded. You need to use the original self tapping screw or purchase a new screw in the recommended parts below.

Blade support

Screw-shoulder

Hex head screw

Wing knob screw 1/4-20 x 1

Cover-wheel dust