Shop replacement repair parts for Trane Furnace model TUE080A936K3

Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.

Stainless steel burner

HSI control module with four wire leads The HSIcontrol module regulates the supply of power to the furnace components. Be sure to check more commonly defective parts before replacing the control board.

Fan capacitor, 440 volts, 5.0 MFD

Hot surface furnace ignitor with plug on connector

Gas Valve Assembly
Please see related items for gas valve adapter kit

Transformer; 115v pri, 24v sec., 60hz, 35va, foot mount

Thermal limit switch, open at 190 degrees, close at 160 degrees F

Draft Inducer Motor, 1 stage. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Door switch, 21 amps, 125/250 vac

Gasket; venter assembly

Resilient ring, 2 required

Brass orifice spud, drill #45

Gasket;collector box

Filter; permanent, 25 x 16.5 x 1in.