Shop replacement repair parts for Trane Furnace model TUC080C942A0

Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.

Stainless steel burner

Run Capacitor, 10 uf, 440 VAC

Ignition Control Board. The ignition control board regulates the supply of power to the furnace components. Be sure to check more commonly defective parts before replacing the control board.

Transformer; 115v pri, 24v sec., 60hz, 35va, foot mount

Control; fuse link, open at 333 deg f

Thermal limit switch, open at 190 degrees, close at 160 degrees

Transition receptacle, includes four mounting screws

MOTOR; 1/3 HP, 115/60/1 1075 RPM, 48 FRAME, PSC

Furnace draft inducer motor. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Resilient ring, 2 required

Hot Surface Ignitor with 11" leads, Y Style Mounting Block, Oblong Base, Insulation 200°C, Stripped Ends, Includes Ceramic Wire Nuts, Includes Gasket. Replaces R/S 41-406

Brass orifice spud, drill #45

Gasket;collector box

Wheel; blower, 10 inch dia x 8 inch width, 1/2 inch