Shop replacement repair parts for Trane Furnace model TUX1B080A9421AB

Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.

Stainless steel burner

Run Capacitor, 10 uf, 440 VAC

Thermal limit switch, open at 180 degrees, close at 150 degrees

Transformer; 115v pri, 24v sec., 60hz, 35va, foot mount

Integrated single-stage furnace control board. The control board regulates the supply of power to the furnace components. Be sure to check more commonly defective parts before replacing the control board.

Switch; switch-flame rollout, 82 degrees c, 180 deg

Door switch, 21 amps, 125/250 vac

MOTOR; 1/3 HP, 115/60/1 1075 RPM, 48 FRAME, PSC

Natural Gas To LP Gas Conversion Kit. Kit includes, 7 orifice main burner #56, 1 LP spring conversion kit, 1 propane label, 1 conversion label, 1 conversion responsibility label, 1 installer's guide. *Should be installed by a certified Trane repairperson.

Furnace draft inducer motor. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Switch; limit inducer

Brass orifice spud, drill #45

Gasket;collector box

Gas Valve Assembly
Please see related items for gas valve adapter kit