Shop replacement repair parts for Trane Furnace model TUH1B060A9361AA

Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.

Stainless steel burner

Fan capacitor, 440 volts, 5.0 MFD

Thermal limit switch, open at 180 degrees, close at 150 degrees

Transformer; 115v pri, 24v sec., 60hz, 35va, foot mount

Integrated single-stage furnace control board. The control board regulates the supply of power to the furnace components. Be sure to check more commonly defective parts before replacing the control board.

Switch; switch-flame rollout, 82 degrees c, 180 deg

Door switch, 21 amps, 125/250 vac

Draft inducer motor, one stage with shaded pole motor *Note: All models use this part with the exception of: *UX/DX100A, UX/DX100C, UX/DX1C100, UX1D100, UX/DX120A, UX/DX120C. These select models use item 2458691.

Natural Gas To LP Gas Conversion Kit. Kit includes, 7 orifice main burner #56, 1 LP spring conversion kit, 1 propane label, 1 conversion label, 1 conversion responsibility label, 1 installer's guide. *Should be installed by a certified Trane repairperson.

Switch; pressure, 28 va pilot duty 24 vac, 125 va p

Switch; limit inducer

Resilient ring, 2 required

Brass orifice spud, drill #45

Gasket;collector box