GE Washer/Dryer Combo GTUP270EM0WW Parts

If your clothes dryer drum doesn't turn when the dryer is on, you likely need the Drive Belt WE03X29897, which is 89-1/2 inches long with four ribs. This genuine OEM replacement part is compatible with Whirlpool, Kenmore, GE, Hotpoint, and RCA dryers and washer/dryer combos.

Dryer drum slide. There are two of these needed on your dryer. These go on the outer most slots on the front bearing. Sold as pack of two. The drum slides support the front of the dryer drum instead of rollers or bearings. As they wear out the dryer will make more noise.

Dryer drum slide (2 pack). There are two of these needed on your dryer. These go on the inner most slots on the front bearing. The drum slides support the front of the dryer drum instead of rollers or bearings. As they wear out the dryer will make more noise.

Dryer drum slide, pack of two

Dryer bearing slide 2-pack

The GE Appliances Front Drum Support Bearing WE3M26 is a high-quality part that allows the front of the drum to glide smoothly on the felt seal of the front panel when the drum is rotating. It is also called the Drum Glide Bearing. Disconnect the appliance from all utilities prior to installation.

Rear drum bearing sleeve

Push to start switch

High-limit thermostat for dryer. L315-65. If the dryer overheats, this high-limit thermostat will cut off the power to the drive motor. If the high-limit thermostat has blown, the dryer won't start.

Door lid lock & switch assembly

Door switch

The Genuine OEM GE Appliances Cycling Thermostat regulates the internal temperature of the dryer and has limits of 210°F to 30°F. It is recommended to disconnect the appliance from all utilities prior to installation. Compatible with various GE models.

All purpose switch

Felt Top Bearing

O-Ring for retaining drum bearing sleeve on shaft