In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Washer Rear Control Cover Panel Replacement WH10X28195
This video provides step-by-step repair instructions for replacing the rear control cover panel on a GE washer (Model GTW465ASN2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with washer-
Don't forget to like and comment on this video and subscribe to our channel!
GE Washer Rear Control Cover Panel Replacement WH10X28195
Total Parts Cost
$NaN01:43
- Description
This video provides step-by-step repair instructions for replacing the rear control cover panel on a GE washer (Model GTW465ASN2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with washer-
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
To replace the rear control cover panel on your ge washer, you will need a drill driver with a 1/4” bit.
2
Before you begin the procedure, unplug the power to the appliance.
3
Unthread the two screws on the panel. any missing screws can be ordered through the links in the description below.
4
Pull the panel out from the bottom and slide it to the right to free it from the backsplash.
5
To install the new rear control cover panel, insert the panel tabs into the slots on the backsplash then slide it left to secure it.
6
Rethread the two screws.
7
Plug in the washer.
Description
This video provides step-by-step repair instructions for replacing the rear control cover panel on a GE washer (Model GTW465ASN2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with washer-
Don't forget to like and comment on this video and subscribe to our channel!
This video provides step-by-step repair instructions for replacing the rear control cover panel on a GE washer (Model GTW465ASN2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with washer-
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
To replace the rear control cover panel on your ge washer, you will need a drill driver with a 1/4” bit.
2
Before you begin the procedure, unplug the power to the appliance.
3
Unthread the two screws on the panel. any missing screws can be ordered through the links in the description below.
4
Pull the panel out from the bottom and slide it to the right to free it from the backsplash.
5
To install the new rear control cover panel, insert the panel tabs into the slots on the backsplash then slide it left to secure it.
6
Rethread the two screws.
7
Plug in the washer.
Applicable Product Model
Related Articles & Videos