In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Washer Inlet Valve Harness Replacement WH08X29310
This video provides step-by-step repair instructions for replacing the inlet valve harness in a GE washer (Model GTW465ASN2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with washer-
Don't forget to like and comment on this video and subscribe to our channel!
GE Washer Inlet Valve Harness Replacement WH08X29310
Total Parts Cost
$NaN02:28
- Description
This video provides step-by-step repair instructions for replacing the inlet valve harness in a GE washer (Model GTW465ASN2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with washer-
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
To replace the inlet valve harness in your ge washer, you will need a drill driver with a 1/4” bit.
2
Before you begin the procedure, unplug the power to the appliance.
3
Unthread the two screws on the panel. any missing screws can be ordered through the links in the description below.
4
Pull the panel out from the bottom and slide it to the right to free it from the backsplash.
5
Slide the backsplash back and tilt forward.
6
Noting the orientation, unplug the harnesses from the inlet valves.
7
Unplug the harness from the control board.
8
To install the new inlet valve harness, plug the harness into the control board.
9
Plug in the intlet valve harnesses.
10
Tilt the backsplash upright and insert the tabs into the slots.
11
Push forward to lock it in place.
12
Insert the panel tabs into the slots on the backsplash then slide it left to secure it.
13
Rethread the two screws.
14
Plug in the washer.
Description
This video provides step-by-step repair instructions for replacing the inlet valve harness in a GE washer (Model GTW465ASN2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with washer-
Don't forget to like and comment on this video and subscribe to our channel!
This video provides step-by-step repair instructions for replacing the inlet valve harness in a GE washer (Model GTW465ASN2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with washer-
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
To replace the inlet valve harness in your ge washer, you will need a drill driver with a 1/4” bit.
2
Before you begin the procedure, unplug the power to the appliance.
3
Unthread the two screws on the panel. any missing screws can be ordered through the links in the description below.
4
Pull the panel out from the bottom and slide it to the right to free it from the backsplash.
5
Slide the backsplash back and tilt forward.
6
Noting the orientation, unplug the harnesses from the inlet valves.
7
Unplug the harness from the control board.
8
To install the new inlet valve harness, plug the harness into the control board.
9
Plug in the intlet valve harnesses.
10
Tilt the backsplash upright and insert the tabs into the slots.
11
Push forward to lock it in place.
12
Insert the panel tabs into the slots on the backsplash then slide it left to secure it.
13
Rethread the two screws.
14
Plug in the washer.
Applicable Product Model
Related Articles & Videos