KitchenAid Dishwasher Rear Upper Dishrack Handle Replacement W11268681

Print ContentSave Content

Skill Level

Total Parts Cost

$90.40

Estimated Savings

$112.50

01:23

Description

This video provides step-by-step repair instructions for replacing the rear upper dishrack handle on a KitchenAid dishwasher. The most common reason for replacing this part is if it is damaged or missing.

All of the information for this replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag

Step By Step Instructions

Print Instructions

To replace the rear upper dishrack handle in this kitchenaid dishwasher, you will need a t-15 torx bit.

Pull out the upper dishrack, and use the t-15 torx bit to unthread the two screws to separate the two halves of the handle.

To install the new rear upper dishrack handle, first align the front section of the handle on the front of the rack in the middle, then position the new rear section, and thread the two screws to secure.

Description

Step-By-Step Instructions

To replace the rear upper dishrack handle in this kitchenaid dishwasher, you will need a t-15 torx bit.

Pull out the upper dishrack, and use the t-15 torx bit to unthread the two screws to separate the two halves of the handle.