Whirlpool Top-Load Washer Rotor Replacement W11260238

Print ContentSave Content

Skill Level

Total Parts Cost

$128.73

Estimated Savings

$112.50

03:31

Description

This video provides step-by-step instructions for replacing the rotor on a Whirlpool top-loading washing machine, model WTW7120HW0. The most common reason for replacing this part is if the washer will not spin or agitate.

All of the information in this part replacement video is applicable to the following brands: Whirlpool

Step By Step Instructions

Print Instructions

To replace the rotor in this whirlpool top-load washer…

… you will need a t-30 torx bit, channel-lock pliers, and a flat-head screwdriver.

Before you begin the procedure, unplug the appliance’s power cord…

… and shut off the incoming water supply.

Unthread the hot and cold water supply hoses from the inlet valve ports – be prepared for some water to spill.

Use the channel-lock pliers to release the spring clamp so you can detach the drain hose from the outlet port.

Now have an assistant help you to move the washer away from the wall…

… and tip the appliance back so its rear panel rests on a towel or blanket.

Insert the flat-head screwdriver into an inner hole of the rotor to hold it in place…

… as you use the t-30 torx bit to unthread the rotor mounting screw counter-clockwise.

With the screw unthreaded, you can pull the old rotor free – because of the permanent magnets in the rotor, this may require some effort.

To install the new rotor…

… align it over the stator, keeping your fingers away from the underside of the rotor.

Thread the mounting screw clockwise and secure the rotor with the flat-head screwdriver as you tighten the screw.

Return the washer to its upright position…

… and move the appliance back against the wall.

Reattach the drain hose to the outlet port, securing it with the clamp.

Attach the hot and cold water supply hoses to the appropriate inlet valve ports.

Turn the water supply back on…

… plug the appliance’s power cord back in…

… and the washer should be ready for use.

Description

Step-By-Step Instructions

To replace the rotor in this whirlpool top-load washer…

… you will need a t-30 torx bit, channel-lock pliers, and a flat-head screwdriver.

Before you begin the procedure, unplug the appliance’s power cord…

… and shut off the incoming water supply.

Unthread the hot and cold water supply hoses from the inlet valve ports – be prepared for some water to spill.

Use the channel-lock pliers to release the spring clamp so you can detach the drain hose from the outlet port.

Now have an assistant help you to move the washer away from the wall…

… and tip the appliance back so its rear panel rests on a towel or blanket.

Insert the flat-head screwdriver into an inner hole of the rotor to hold it in place…

… as you use the t-30 torx bit to unthread the rotor mounting screw counter-clockwise.

With the screw unthreaded, you can pull the old rotor free – because of the permanent magnets in the rotor, this may require some effort.

To install the new rotor…

… align it over the stator, keeping your fingers away from the underside of the rotor.

Thread the mounting screw clockwise and secure the rotor with the flat-head screwdriver as you tighten the screw.

Return the washer to its upright position…

… and move the appliance back against the wall.

Reattach the drain hose to the outlet port, securing it with the clamp.

Attach the hot and cold water supply hoses to the appropriate inlet valve ports.

Turn the water supply back on…

… plug the appliance’s power cord back in…

… and the washer should be ready for use.

Applicable Product Model

Brand

Whirlpool

Product Type

Washing Machine

Model

WTW7120HW0

Subtype

Product Diagram & Manuals

Parts Needed

Rotor Assembly

$128.73

Recommended Tools and Accessories

Cleaner

$8.38

Total$0.00

Whirlpool Top-Load Washer Rotor Replacement W11260238

Step By Step Instructions

Applicable Product Model

Related Articles & Videos