GET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Dishwasher Lower Rack Roller Assembly Replacement (Interchangeable Design) #WD28X27241
GE Dishwasher Lower Rack Roller Assembly Replacement (Interchangeable Design) #WD28X27241
01:37
- Description
This video provides step-by-step instructions for replacing the lower rack roller assembly in GE dishwashers using the interchangeable design. The most common reason for replacing the lower rack roller assembly is if it's cracked or broken.
All of the information in this check valve video is applicable to the following brands: GE
All of the information in this check valve video is applicable to the following brands: GE
Step By Step Instructions
1
To replace the lower rack roller assembly in your GE dishwasher, you will need a flat head screwdriver.
2
Roll the lower rack assembly out of the dishwasher and take out the silverware basket.
3
Remove the lower rack assembly and set the rack on a flat surface.
4
Using the flathead, unclip the roller assembly from the lower rack.
5
To install the new roller assembly, snap the roller supplied by the kit onto the clips of the universal bracket.
6
Slide and snap the assembly onto the rack.
7
Set the rack assembly on the door and place in the silverware basket.
8
Slide the lower rack assembly back into the dishwasher, and your dishwasher should be ready for use.
Description
This video provides step-by-step instructions for replacing the lower rack roller assembly in GE dishwashers using the interchangeable design. The most common reason for replacing the lower rack roller assembly is if it's cracked or broken.
All of the information in this check valve video is applicable to the following brands: GE
All of the information in this check valve video is applicable to the following brands: GE
Step-By-Step Instructions
1
To replace the lower rack roller assembly in your GE dishwasher, you will need a flat head screwdriver.
2
Roll the lower rack assembly out of the dishwasher and take out the silverware basket.
3
Remove the lower rack assembly and set the rack on a flat surface.
4
Using the flathead, unclip the roller assembly from the lower rack.
5
To install the new roller assembly, snap the roller supplied by the kit onto the clips of the universal bracket.
6
Slide and snap the assembly onto the rack.
7
Set the rack assembly on the door and place in the silverware basket.
8
Slide the lower rack assembly back into the dishwasher, and your dishwasher should be ready for use.
Applicable Product Model
Related Articles & Videos