Frigidaire Induction Range Module Fan Seal Replacement 316302201

Total Parts Cost

$NaN

03:44

Description

This video provides step-by-step repair instructions for replacing the module fan seal on a Frigidaire induction range. The most common reason for replacing this part is if it is damaged or missing.

All of the information for this part replacement video is applicable to the following brands:
Frigidaire

Step By Step Instructions

Print Instructions

Frigidaire Induction Range - GCRI3058AFD

Frigidaire Induction Range Module Fan Seal Replacement

Tools needed: Phillips-head screwdriver and razor blade

Open the oven door and use the Phillips-head screwdriver to unthread the three screws securing the main top.

Heavy

With the screws unthreaded, pull the main top forward to fully remove.

Next. Unthread the three screws securing the induction coil support panel.

Sharp

Lift the panel up and support it.

You can now use a razor blade to help remove the old induction module fan seal, if still intact.

Before you install the new module fan seal, clean off any residue from the vent duct.

Peel off the backing to expose the adhesive, then position the new seal on the vent duct and press firmly.

Remove the support and reposition the induction coil support panel.

Thread the three mounting screws to secure.

Reinstall the main top by aligning the sides under the front support bracket, then carefully slide the top back, pressing the induction coils down as you do this.

With the top in place, thread the three screws in front to fully secure it

Plug the power cord back in or restore the power supply and the induction range should be ready for use.