In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenAid Garbage Disposer Tail Pipe Replacement 4211317 
KitchenAid Garbage Disposer Tail Pipe Replacement 4211317
Skill Level
Total Parts Cost
$65.35Estimated Savings
$112.5002:05
- Description
This video provides step-by-step repair instructions for replacing the tail pipe on a KitchenAid garbage disposer. The most common reason for replacing this part is if it is damaged or leaking.
All of the information for this replacement video is applicable to the following brands:
KitchenAid
All of the information for this replacement video is applicable to the following brands:
KitchenAid
Step By Step Instructions
1
KitchenAid Garbage Disposer - KCDB250G4
2
KitchenAid Garbage Disposer Tail Pipe Replacement
3
Tools needed: 3/8th inch nut driver or flat-head screwdriver
4
Shock
5
Before you begin the procedure, unplug the unit?s power cord.
6
Using the 3/8th inch nut driver or the flat-head screwdriver, unthread the two mounting screws securing the tailpipe flange to the disposer.
7
Rotate the pipe out of the way.
8
Unthread the nut to detach the old pipe.
9
To install the new tail pipe, slide the flange onto the pipe, followed by the nut and gasket.
10
Partially align the tailpipe and position the flange with the disposer?s outlet port then secure with the mounting screws.
11
Fully insert the pipe and thread the nut to secure.
12
Plug the power cord back in and the garbage disposer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the tail pipe on a KitchenAid garbage disposer. The most common reason for replacing this part is if it is damaged or leaking.
All of the information for this replacement video is applicable to the following brands:
KitchenAid
All of the information for this replacement video is applicable to the following brands:
KitchenAid
Step-By-Step Instructions
1
KitchenAid Garbage Disposer - KCDB250G4
2
KitchenAid Garbage Disposer Tail Pipe Replacement
3
Tools needed: 3/8th inch nut driver or flat-head screwdriver
4
Shock
5
Before you begin the procedure, unplug the unit?s power cord.
6
Using the 3/8th inch nut driver or the flat-head screwdriver, unthread the two mounting screws securing the tailpipe flange to the disposer.
7
Rotate the pipe out of the way.
8
Unthread the nut to detach the old pipe.
9
To install the new tail pipe, slide the flange onto the pipe, followed by the nut and gasket.
10
Partially align the tailpipe and position the flange with the disposer?s outlet port then secure with the mounting screws.
11
Fully insert the pipe and thread the nut to secure.
12
Plug the power cord back in and the garbage disposer should be ready for use.
Applicable Product Model
Parts Needed
Drain Pipe
$65.35
Total$0.00
Related Articles & Videos
04:09
Part Replacement
KitchenAid Garbage Disposer Upper Sink Flange Seal Replacement WP4211302