In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenAid Garbage Disposer Install Kit 8174355A 
KitchenAid Garbage Disposer Install Kit 8174355A
Skill Level
Total Parts Cost
$13.18Estimated Savings
$112.5002:20
- Description
This video provides step-by-step repair instructions for using the disposer install kit on a KitchenAid garbage disposer. This kit can be used to install a new disposer in your kitchen.
All of the information for this replacement video is applicable to the following brands:
KitchenAid
All of the information for this replacement video is applicable to the following brands:
KitchenAid
Step By Step Instructions
1
KitchenAid Garbage Disposer - KCDB250G4
2
KitchenAid Garbage Disposer Install Kit Installation
3
Tools needed: 3/8th inch nut driver or flat-head screwdriver
4
Shock
5
Before you begin the procedure, unplug the unit?s power cord.
6
Using the 3/8th inch nut driver or the flat-head screwdriver, unthread the two mounting screws securing the tailpipe flange to the disposer.
7
Rotate the pipe out of the way.
8
Unthread the nut to detach the old pipe.
9
Remove the old tailpipe gasket.
10
You?re now ready to install the new kit components.
11
Position the new gasket on the disposer?s outlet port.
12
Slide the new flange onto the new pipe followed by the nut and pipe gasket.
13
Partially align the tailpipe and position the flange with the port then secure with the provided mounting screws.
14
Fully insert the pipe and thread the nut to secure.
15
Plug the power cord back in and the garbage disposer should be ready for use.
Description
This video provides step-by-step repair instructions for using the disposer install kit on a KitchenAid garbage disposer. This kit can be used to install a new disposer in your kitchen.
All of the information for this replacement video is applicable to the following brands:
KitchenAid
All of the information for this replacement video is applicable to the following brands:
KitchenAid
Step-By-Step Instructions
1
KitchenAid Garbage Disposer - KCDB250G4
2
KitchenAid Garbage Disposer Install Kit Installation
3
Tools needed: 3/8th inch nut driver or flat-head screwdriver
4
Shock
5
Before you begin the procedure, unplug the unit?s power cord.
6
Using the 3/8th inch nut driver or the flat-head screwdriver, unthread the two mounting screws securing the tailpipe flange to the disposer.
7
Rotate the pipe out of the way.
8
Unthread the nut to detach the old pipe.
9
Remove the old tailpipe gasket.
10
You?re now ready to install the new kit components.
11
Position the new gasket on the disposer?s outlet port.
12
Slide the new flange onto the new pipe followed by the nut and pipe gasket.
13
Partially align the tailpipe and position the flange with the port then secure with the provided mounting screws.
14
Fully insert the pipe and thread the nut to secure.
15
Plug the power cord back in and the garbage disposer should be ready for use.
Applicable Product Model
Related Articles & Videos
04:09
Part Replacement
KitchenAid Garbage Disposer Upper Sink Flange Seal Replacement WP4211302