In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairRyobi String Trimmer Engine Cover Replacement #205082001 
Ryobi String Trimmer Engine Cover Replacement #205082001
Total Parts Cost
$NaN03:34
- Description
This video provides step-by-step instructions for replacing the engine cover on a Ryobi string trimmer.
All of the information in this replacement video is applicable to the following brands: Ryobi
All of the information in this replacement video is applicable to the following brands: Ryobi
Step By Step Instructions
1
Before you replace the engine cover on your string trimmer, make sure the engine has cooled.
2
We recommend performing this procedure with little or no fuel in the tank.
3
Using a T20 Torx bit, unthread the locking screw from the engine cover.
4
Use a T25 Torx bit to unthread the clamp bolt, and you can pull the engine assembly off of the drive shaft.
5
Using the T20 Torx bit, unthread the five screws securing the recoil starter assembly to the engine cover and engine.
6
Set the recoil starter aside and unthread the four front screws securing the engine cover.
7
You can now remove the old cover.
8
Install the new engine cover by positioning it on the engine, thread, and tighten the four front screws.
9
Reposition the recoil starter on the engine assembly, making sure the recoil pulley engages with the starter pawl.
10
Thread the five screws to secure the larger screws go on the bottom.
11
Align the engine assembly on the driveshaft and thread the locking screw.
12
With the locking screw in place, thread and tighten the clamp bolt.
13
Refill the fuel tank if necessary, and your string trimmer should be ready for use.
Description
This video provides step-by-step instructions for replacing the engine cover on a Ryobi string trimmer.
All of the information in this replacement video is applicable to the following brands: Ryobi
All of the information in this replacement video is applicable to the following brands: Ryobi
Step-By-Step Instructions
1
Before you replace the engine cover on your string trimmer, make sure the engine has cooled.
2
We recommend performing this procedure with little or no fuel in the tank.
3
Using a T20 Torx bit, unthread the locking screw from the engine cover.
4
Use a T25 Torx bit to unthread the clamp bolt, and you can pull the engine assembly off of the drive shaft.
5
Using the T20 Torx bit, unthread the five screws securing the recoil starter assembly to the engine cover and engine.
6
Set the recoil starter aside and unthread the four front screws securing the engine cover.
7
You can now remove the old cover.
8
Install the new engine cover by positioning it on the engine, thread, and tighten the four front screws.
9
Reposition the recoil starter on the engine assembly, making sure the recoil pulley engages with the starter pawl.
10
Thread the five screws to secure the larger screws go on the bottom.
11
Align the engine assembly on the driveshaft and thread the locking screw.
12
With the locking screw in place, thread and tighten the clamp bolt.
13
Refill the fuel tank if necessary, and your string trimmer should be ready for use.
Applicable Product Model
Related Articles & Videos