In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairToro Snowblower Muffler Assembly Replacement 133-9846
Toro Snowblower Muffler Assembly Replacement 133-9846
Total Parts Cost
$NaN03:41
- Description
This video provides step-by-step repair instructions for replacing the muffler assembly on a Toro snowblower.
All of the information for this video is applicable to the following brands:
Toro
All of the information for this video is applicable to the following brands:
Toro
Step By Step Instructions
1
Before you replace the muffler assembly in your snowblower, make sure the engine and the existing muffler have cooled.
2
You can use an eight millimeter socket to unthread five of the six bolts securing the muffler cover.
3
You will need to use an eight millimeter wrench to unthread the sixth bolt.
4
Use a 3/8 inch socket or nut driver to unthread the mounting bolt securing the housing to the rear bracket.
5
Next, unthread the screws to release the two retaining clamps holding the housing to the handle.
6
Now, use a half-inch socket to fully unfold securing the handle assembly.
7
Lower the handle and you can fully remove the muffler cover.
8
Use the half-inch socket to unthread the mounting nuts securing the muffler assembly.
9
Slide off the old assembly.
10
Remove the exhaust gasket.
11
To install the new muffler assembly, first place the existing gasket or a new one on the mounting bolts.
12
Then, position the new assembly.
13
Thread the nuts to secure.
14
Reposition the muffler cover and thread the six bolts to secure.
15
Reposition the handle assembly and rethread the upper bolts.
16
Align the two retaining clamps and thread the screws to secure the housing to the handle.
17
Rethread the mounting bolt to secure the housing to the rear bracket.
18
Your snowblower should now be ready for use.
Description
This video provides step-by-step repair instructions for replacing the muffler assembly on a Toro snowblower.
All of the information for this video is applicable to the following brands:
Toro
All of the information for this video is applicable to the following brands:
Toro
Step-By-Step Instructions
1
Before you replace the muffler assembly in your snowblower, make sure the engine and the existing muffler have cooled.
2
You can use an eight millimeter socket to unthread five of the six bolts securing the muffler cover.
3
You will need to use an eight millimeter wrench to unthread the sixth bolt.
4
Use a 3/8 inch socket or nut driver to unthread the mounting bolt securing the housing to the rear bracket.
5
Next, unthread the screws to release the two retaining clamps holding the housing to the handle.
6
Now, use a half-inch socket to fully unfold securing the handle assembly.
7
Lower the handle and you can fully remove the muffler cover.
8
Use the half-inch socket to unthread the mounting nuts securing the muffler assembly.
9
Slide off the old assembly.
10
Remove the exhaust gasket.
11
To install the new muffler assembly, first place the existing gasket or a new one on the mounting bolts.
12
Then, position the new assembly.
13
Thread the nuts to secure.
14
Reposition the muffler cover and thread the six bolts to secure.
15
Reposition the handle assembly and rethread the upper bolts.
16
Align the two retaining clamps and thread the screws to secure the housing to the handle.
17
Rethread the mounting bolt to secure the housing to the rear bracket.
18
Your snowblower should now be ready for use.
Applicable Product Model
Related Articles & Videos