In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairToro Snowblower Deflector Release Lever Spring Replacement 136-7136
Toro Snowblower Deflector Release Lever Spring Replacement 136-7136
Total Parts Cost
$NaN01:26
- Description
This video provides step-by-step repair instructions for replacing the deflector release lever spring on a Toro snowblower.
All of the information for this video is applicable to the following brands:
Toro
All of the information for this video is applicable to the following brands:
Toro
Step By Step Instructions
1
Toro Snowblower - Model 38752
2
Snowblower Chute Deflector Release Lever Spring Replacement
3
Tools Needed
4
You will need a 3/8th inch socket for this procedure.
5
Use a 3/8th inch socket to unthread the two mounting screws securing the deflector and hinge.
6
If still intact, depress the release lever and pull the hinge arm past the lever so you can remove the lever and springs.
7
We recommend replacing both lever springs at the same time.
8
With the hinge arm pulled back, align the lever along with the new springs.
9
Confirm the deflector seal is aligned on the tabs.
10
Reposition the deflector assembly on the chute and thread the mounting screws.
11
Congrats! Your snowblower is ready for use.
Description
This video provides step-by-step repair instructions for replacing the deflector release lever spring on a Toro snowblower.
All of the information for this video is applicable to the following brands:
Toro
All of the information for this video is applicable to the following brands:
Toro
Step-By-Step Instructions
1
Toro Snowblower - Model 38752
2
Snowblower Chute Deflector Release Lever Spring Replacement
3
Tools Needed
4
You will need a 3/8th inch socket for this procedure.
5
Use a 3/8th inch socket to unthread the two mounting screws securing the deflector and hinge.
6
If still intact, depress the release lever and pull the hinge arm past the lever so you can remove the lever and springs.
7
We recommend replacing both lever springs at the same time.
8
With the hinge arm pulled back, align the lever along with the new springs.
9
Confirm the deflector seal is aligned on the tabs.
10
Reposition the deflector assembly on the chute and thread the mounting screws.
11
Congrats! Your snowblower is ready for use.
Applicable Product Model
Related Articles & Videos