In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairToro Snowblower Clutch Cable Guide Replacement 139-3565
Toro Snowblower Clutch Cable Guide Replacement 139-3565
Total Parts Cost
$NaN03:40
- Description
This video provides step-by-step repair instructions for replacing the clutch cable guide on a Toro snowblower.
All of the information for this video is applicable to the following brands:
Toro
All of the information for this video is applicable to the following brands:
Toro
Step By Step Instructions
1
To replace the clutch cable guide in your snowblower, use a 3/8 inch socket or nut driver to unthread the three mounting screws.
2
To release the belt cover, use pliers to detach the idler arm spring and clip.
3
Remove the belt from the idler pulley.
4
Use a 1/2 inch wrench to secure the idler arm mounting bolt inside the auger housing and a 1/2 inch socket to unthread the nut to release the idler arm.
5
Disconnect the clutch cable.
6
Use an eleven thirty-second inch wrench or an adjustable wrench to secure the nut and a quarter inch socket to unthread the bolts securing the cable guide.
7
Lift off the cap and remove the clutch cable from the old guide.
8
Install the new clutch cable guide by positioning the cable and the guide.
9
Then, align the cap.
10
Position the guide assembly on the back side of the pulley housing and secure it with the nut and bolt.
11
Reinsert the z end of the clutch cable into the hole in the idler arm.
12
Make sure the washer is in place on the bolt.
13
Then, position the assembly and slide on the bushing.
14
Thread the nut onto the bolt to secure.
15
Realign the belt on the idler pulley.
16
Reposition the idler spring clip in the frame.
17
Attach the spring to the clip and the idler arm.
18
Replace the belt cover and secure it with the screws.
19
Your snowblower should now be ready for use.
Description
This video provides step-by-step repair instructions for replacing the clutch cable guide on a Toro snowblower.
All of the information for this video is applicable to the following brands:
Toro
All of the information for this video is applicable to the following brands:
Toro
Step-By-Step Instructions
1
To replace the clutch cable guide in your snowblower, use a 3/8 inch socket or nut driver to unthread the three mounting screws.
2
To release the belt cover, use pliers to detach the idler arm spring and clip.
3
Remove the belt from the idler pulley.
4
Use a 1/2 inch wrench to secure the idler arm mounting bolt inside the auger housing and a 1/2 inch socket to unthread the nut to release the idler arm.
5
Disconnect the clutch cable.
6
Use an eleven thirty-second inch wrench or an adjustable wrench to secure the nut and a quarter inch socket to unthread the bolts securing the cable guide.
7
Lift off the cap and remove the clutch cable from the old guide.
8
Install the new clutch cable guide by positioning the cable and the guide.
9
Then, align the cap.
10
Position the guide assembly on the back side of the pulley housing and secure it with the nut and bolt.
11
Reinsert the z end of the clutch cable into the hole in the idler arm.
12
Make sure the washer is in place on the bolt.
13
Then, position the assembly and slide on the bushing.
14
Thread the nut onto the bolt to secure.
15
Realign the belt on the idler pulley.
16
Reposition the idler spring clip in the frame.
17
Attach the spring to the clip and the idler arm.
18
Replace the belt cover and secure it with the screws.
19
Your snowblower should now be ready for use.
Applicable Product Model
Related Articles & Videos