In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairToro Snowblower Primer Kit Replacement 127-9079
Toro Snowblower Primer Kit Replacement 127-9079
Total Parts Cost
$NaN03:58
- Description
This video provides step-by-step repair instructions for replacing the primer kit on a Toro snowblower.
All of the information for this video is applicable to the following brands:
Toro
All of the information for this video is applicable to the following brands:
Toro
Step By Step Instructions
1
Before you install the primer kit components in your snowblower, make sure the engine and muffler have cooled.
2
You can use an eight millimeter socket to unthread five of the six bolts securing the muffler cover.
3
You will need to use an eight millimeter wrench to unthread the sixth bolt.
4
Use a 3/8 inch socket or nut driver to unthread the mounting bolts securing the housing to the rear bracket.
5
Next, unthread the screws to release the two retaining clamps holding the housing to the handle.
6
Now, use a half-inch socket to fully on the bolts securing the handle assembly.
7
Lower the handle and you can fully remove the muffler cover.
8
Detach the primer hose from the primer bulb and carburetor.
9
Be prepared for some fuel to spill.
10
Use needle nose pliers to depress the tabs to release the old primer bulb.
11
You're now ready to install the new primer kit components.
12
Snap the new primer bulb into place on the control housing.
13
Confirm that clamps are positioned on the new hose, then attach the hose to the primer bulb and carburetor.
14
Then, secure the hose with the clamps.
15
Reposition the muffler cover and thread the six bolts to secure.
16
Reposition the handle assembly and rethread the upper bolts.
17
Align the two retaining clamps and thread the screws to secure the housing to the handle.
18
Rethread the mounting bolt to secure the housing to the rear bracket.
19
Your snowblower should now be ready for use.
Description
This video provides step-by-step repair instructions for replacing the primer kit on a Toro snowblower.
All of the information for this video is applicable to the following brands:
Toro
All of the information for this video is applicable to the following brands:
Toro
Step-By-Step Instructions
1
Before you install the primer kit components in your snowblower, make sure the engine and muffler have cooled.
2
You can use an eight millimeter socket to unthread five of the six bolts securing the muffler cover.
3
You will need to use an eight millimeter wrench to unthread the sixth bolt.
4
Use a 3/8 inch socket or nut driver to unthread the mounting bolts securing the housing to the rear bracket.
5
Next, unthread the screws to release the two retaining clamps holding the housing to the handle.
6
Now, use a half-inch socket to fully on the bolts securing the handle assembly.
7
Lower the handle and you can fully remove the muffler cover.
8
Detach the primer hose from the primer bulb and carburetor.
9
Be prepared for some fuel to spill.
10
Use needle nose pliers to depress the tabs to release the old primer bulb.
11
You're now ready to install the new primer kit components.
12
Snap the new primer bulb into place on the control housing.
13
Confirm that clamps are positioned on the new hose, then attach the hose to the primer bulb and carburetor.
14
Then, secure the hose with the clamps.
15
Reposition the muffler cover and thread the six bolts to secure.
16
Reposition the handle assembly and rethread the upper bolts.
17
Align the two retaining clamps and thread the screws to secure the housing to the handle.
18
Rethread the mounting bolt to secure the housing to the rear bracket.
19
Your snowblower should now be ready for use.
Applicable Product Model
Related Articles & Videos