DescriptionThis video provides step-by-step repair instructions for replacing the idler arm spring on a Toro snowblower.
All of the information for this video is applicable to the following brands:
Toro
Step-By-Step Instructions1
Toro Snowblower - Model 38752
2
Snowblower Idler Arm Spring Replacement
4
You will need a 3/8th inch socket and pliers for this procedure.
5
Use a 3/8th inch socket or nut driver to unthread the three mounting screws to release the belt cover.
6
You can use pliers to detach the old idler arm spring.
7
Install the new idler arm spring by first repositioning the idler spring clip in the frame, then attach the new spring to the clip and the idler arm.
8
Replace the belt cover and secure it with the screws.
9
Congrats! Your snowblower is ready for use.