In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairToro Snowblower Auger Blade Kit Replacement 38261 
Toro Snowblower Auger Blade Kit Replacement 38261
Total Parts Cost
$NaN02:50
- Description
This video provides step-by-step repair instructions for replacing the auger blade kit on a Toro snowblower.
All of the information for this video is applicable to the following brands:
Toro
All of the information for this video is applicable to the following brands:
Toro
Step By Step Instructions
1
To install the auger blade kit components on your snowblower, use an 11 millimeter wrench to secure the nuts and a T27 Torx bit to unthread the four bolts securing the two ends of each blade.
2
Next, use a 7/16 inch socket to unthread the middle bolts.
3
Loosen the center bolt to fully release the two blades.
4
Prepare the new auger blades for installation by inserting the bushings in the middle holes.
5
Now, position the blades in the center mounting plate.
6
Use the new nuts and bolts to secure the new blades, starting in the middle.
7
Thread and tighten the side nuts and bolts to secure the ends.
8
Now, replace the center bolt with a new one.
9
Your snowblower should now be ready for use.
Description
This video provides step-by-step repair instructions for replacing the auger blade kit on a Toro snowblower.
All of the information for this video is applicable to the following brands:
Toro
All of the information for this video is applicable to the following brands:
Toro
Step-By-Step Instructions
1
To install the auger blade kit components on your snowblower, use an 11 millimeter wrench to secure the nuts and a T27 Torx bit to unthread the four bolts securing the two ends of each blade.
2
Next, use a 7/16 inch socket to unthread the middle bolts.
3
Loosen the center bolt to fully release the two blades.
4
Prepare the new auger blades for installation by inserting the bushings in the middle holes.
5
Now, position the blades in the center mounting plate.
6
Use the new nuts and bolts to secure the new blades, starting in the middle.
7
Thread and tighten the side nuts and bolts to secure the ends.
8
Now, replace the center bolt with a new one.
9
Your snowblower should now be ready for use.
Applicable Product Model
Related Articles & Videos