In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairToro Snowblower Ratchet Pawl Spring Replacement 80-4600
Toro Snowblower Ratchet Pawl Spring Replacement 80-4600
Total Parts Cost
$NaN03:22
- Description
This video provides step-by-step repair instructions for replacing the ratchet pawl spring on a Toro snowblower.
All of the information for this video is applicable to the following brands:
Toro
All of the information for this video is applicable to the following brands:
Toro
Step By Step Instructions
1
Toro Snowblower - Model 38752
2
Snowblower Chute Deflector Release Lever Replacement
3
Tools Needed
4
You will need a 3/8th inch socket for this procedure.
5
"If still intact, depress the release lever and pull the hinge arm past the lever so you can remove the old lever and springs."
6
"To install the new deflector release lever, with the hinge arm pulled back, first align the new lever along with the springs."
7
Confirm the deflector seal is aligned on the tabs.
8
Reposition the deflector assembly on the chute and thread the mounting screws.
9
Congrats! Your snowblower is ready for use.
10
Use the 3/8th inch socket or nut driver to unthread the mounting bolt securing the housing to the rear bracket.
11
Fully remove the housing.
12
Install the new ratchet pawl spring by hooking one end onto the ratchet pawl and the other end onto the ring assembly.
13
Align the two retaining clamps and thread the screws to secure the housing to the handle.
14
Replace the three right-side screws.
15
Reposition the ring seal on the housing so the phillips-head screw hole aligns with the appropriate screw hole in the gear ring.
16
"Realign the handle on the chute, then reposition the assembly on the ring seal and thread the three mounting bolts to secure."
Description
This video provides step-by-step repair instructions for replacing the ratchet pawl spring on a Toro snowblower.
All of the information for this video is applicable to the following brands:
Toro
All of the information for this video is applicable to the following brands:
Toro
Step-By-Step Instructions
1
Toro Snowblower - Model 38752
2
Snowblower Chute Deflector Release Lever Replacement
3
Tools Needed
4
You will need a 3/8th inch socket for this procedure.
5
"If still intact, depress the release lever and pull the hinge arm past the lever so you can remove the old lever and springs."
6
"To install the new deflector release lever, with the hinge arm pulled back, first align the new lever along with the springs."
7
Confirm the deflector seal is aligned on the tabs.
8
Reposition the deflector assembly on the chute and thread the mounting screws.
9
Congrats! Your snowblower is ready for use.
10
Use the 3/8th inch socket or nut driver to unthread the mounting bolt securing the housing to the rear bracket.
11
Fully remove the housing.
12
Install the new ratchet pawl spring by hooking one end onto the ratchet pawl and the other end onto the ring assembly.
13
Align the two retaining clamps and thread the screws to secure the housing to the handle.
14
Replace the three right-side screws.
15
Reposition the ring seal on the housing so the phillips-head screw hole aligns with the appropriate screw hole in the gear ring.
16
"Realign the handle on the chute, then reposition the assembly on the ring seal and thread the three mounting bolts to secure."
Applicable Product Model
Related Articles & Videos