DescriptionThis video provides step-by-step repair instructions for replacing the scraper blade spring on a Toro snowblower.
All of the information for this video is applicable to the following brands:
Toro
Step-By-Step Instructions1
Toro Snowblower - Model 38752
2
Snowblower Scraper Blade Spring Replacement
3
Tools & Assistance Needed
4
You will need pliers for this procedure.
5
Be sure there is little or no fuel in the tank.
6
Tip the snowblower forward so its rests on the auger housing.
7
Use pliers to detach the spring you’re replacing.
8
Install the new scraper blade spring by attaching one end to the blade and the other end to the frame.
9
"Return the snowblower to its upright position, then refill the fuel tank if necessary."
10
Congrats! Your snowblower is ready for use.