In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairToro Snowblower Auger Blade Replacement 99-9313
Toro Snowblower Auger Blade Replacement 99-9313
Total Parts Cost
$NaN02:03
- Description
This video provides step-by-step repair instructions for replacing the auger blade on a Toro snowblower.
All of the information for this drive belt replacement video is applicable to the following brands:
Toro
All of the information for this drive belt replacement video is applicable to the following brands:
Toro
Step By Step Instructions
1
Toro Snowblower - Model 38752
2
Snowblower Auger Blade Replacement
3
Tools Needed
4
"You will need an 11mm wrench, a 7/16th inch socket and a T-27 Torx bit for this procedure."
5
Use an 11mm wrench to secure the nuts and a T-27 Torx bit to unthread the four bolts securing the two ends of the blade.
6
Use a 7/16th inch socket to unthread the two middle bolts.
7
Loosen the center bolt to fully relase the old blade.
8
Prepare the new auger blade for installation by transferring the middle hole bushings from the old blade to the new one.
9
Position the new blade in the center mounting plate.
10
Secure it with the middle nuts and bolts.
11
Tighten the center bolt.
12
Thread and tighten the side nuts and bolts to secure the two ends.
13
Congrats! Your snowblower is ready for use.
Description
This video provides step-by-step repair instructions for replacing the auger blade on a Toro snowblower.
All of the information for this drive belt replacement video is applicable to the following brands:
Toro
All of the information for this drive belt replacement video is applicable to the following brands:
Toro
Step-By-Step Instructions
1
Toro Snowblower - Model 38752
2
Snowblower Auger Blade Replacement
3
Tools Needed
4
"You will need an 11mm wrench, a 7/16th inch socket and a T-27 Torx bit for this procedure."
5
Use an 11mm wrench to secure the nuts and a T-27 Torx bit to unthread the four bolts securing the two ends of the blade.
6
Use a 7/16th inch socket to unthread the two middle bolts.
7
Loosen the center bolt to fully relase the old blade.
8
Prepare the new auger blade for installation by transferring the middle hole bushings from the old blade to the new one.
9
Position the new blade in the center mounting plate.
10
Secure it with the middle nuts and bolts.
11
Tighten the center bolt.
12
Thread and tighten the side nuts and bolts to secure the two ends.
13
Congrats! Your snowblower is ready for use.
Applicable Product Model
Related Articles & Videos