In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Barracuda Refrigerator Ice Maker Module Replacement 8201515 
Whirlpool Barracuda Refrigerator Ice Maker Module Replacement 8201515
Skill Level
Total Parts Cost
$117.24Estimated Savings
$112.5002:15
- Description
This video provides step-by-step repair instructions for replacing the ice maker module on a Whirlpool Barracuda refrigerator (Model WRS325FDAM04). The most common reason for replacing this part is if the refrigerator is not making ice.
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
Step By Step Instructions
1
Before you replace the ice maker module in your refrigerator…
2
…be sure to unplug the power cord.
3
Lift the ice bucket up in the front and pull it out.
4
Use a small flat-head screwdriver to help pry the module cover off.
5
Detach the ice level arm from the module housing.
6
Using a phillips-head screwdriver, unthread the three mounting screws securing the module.
7
You can now pull the old module out.
8
Install the new ice maker module…
9
…by positioning it in the housing – you may need to rotate the ice ejector arms to fully seat the module.
10
Thread the three mounting screws to secure.
11
Insert the ice level arm in the module housing.
12
Snap on the cover.
13
Reinstall the ice bucket.
14
If the bucket doesn’t slide all the way in…
15
…you can rotate the auger to allow the bucket to be fully seated.
16
Plug the power cord back in…
17
…and your refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the ice maker module on a Whirlpool Barracuda refrigerator (Model WRS325FDAM04). The most common reason for replacing this part is if the refrigerator is not making ice.
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
Step-By-Step Instructions
1
Before you replace the ice maker module in your refrigerator…
2
…be sure to unplug the power cord.
3
Lift the ice bucket up in the front and pull it out.
4
Use a small flat-head screwdriver to help pry the module cover off.
5
Detach the ice level arm from the module housing.
6
Using a phillips-head screwdriver, unthread the three mounting screws securing the module.
7
You can now pull the old module out.
8
Install the new ice maker module…
9
…by positioning it in the housing – you may need to rotate the ice ejector arms to fully seat the module.
10
Thread the three mounting screws to secure.
11
Insert the ice level arm in the module housing.
12
Snap on the cover.
13
Reinstall the ice bucket.
14
If the bucket doesn’t slide all the way in…
15
…you can rotate the auger to allow the bucket to be fully seated.
16
Plug the power cord back in…
17
…and your refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Icemaker Module
$117.24
Total$0.00
Related Articles & Videos
04:33
Part Replacement
Whirlpool Barracuda Refrigerator Water Filter Housing Replacement W10862461
01:14
Part Replacement
Whirlpool Barracuda Refrigerator Top Liner LED Replacement WPW10515058
00:53
Part Replacement
Whirlpool Barracuda Refrigerator Meat Drawer Shelf Replacement W11223835
01:19
Part Replacement
Whirlpool Barracuda Refrigerator Crisper Shelf Frame Replacement W10914556
01:38
Part Replacement
Whirlpool Barracuda Refrigerator Beveled LED Replacement WPW10515057