In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Barracuda Refrigerator Humidity Control Body Replacement WP2179343 
Whirlpool Barracuda Refrigerator Humidity Control Body Replacement WP2179343
Skill Level
Total Parts Cost
$25.66Estimated Savings
$112.5001:17
- Description
This video provides step-by-step repair instructions for replacing the humidity control body on a Whirlpool Barracuda refrigerator (Model WRS325FDAM04). The most common reason for replacing this part is if the drawer humidity is not correct.
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
Step By Step Instructions
1
For easier access in replacing the humidity control body on the refrigerator’s crisper drawer…
2
…you can fully remove the drawer by pulling forward then lift up the rear.
3
Move the control slide to the low setting.
4
Depress the bezel tabs to release the control body assembly from the drawer.
5
You will need to slightly widen the bezel portion of the body to remove the slide.
6
Prepare the new humidity control body for installation…
7
…by inserting the slide then widen the bezel portion of the body to fully seat the slide.
8
With the slide positioned to the right, insert the assembly through the slot in the crisper drawer and snap it into place.
9
Reinstall the drawer if required.
Description
This video provides step-by-step repair instructions for replacing the humidity control body on a Whirlpool Barracuda refrigerator (Model WRS325FDAM04). The most common reason for replacing this part is if the drawer humidity is not correct.
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
Step-By-Step Instructions
1
For easier access in replacing the humidity control body on the refrigerator’s crisper drawer…
2
…you can fully remove the drawer by pulling forward then lift up the rear.
3
Move the control slide to the low setting.
4
Depress the bezel tabs to release the control body assembly from the drawer.
5
You will need to slightly widen the bezel portion of the body to remove the slide.
6
Prepare the new humidity control body for installation…
7
…by inserting the slide then widen the bezel portion of the body to fully seat the slide.
8
With the slide positioned to the right, insert the assembly through the slot in the crisper drawer and snap it into place.
9
Reinstall the drawer if required.
Applicable Product Model
Parts Needed
Humidity Control
$25.66
Total$0.00
Related Articles & Videos
04:33
Part Replacement
Whirlpool Barracuda Refrigerator Water Filter Housing Replacement W10862461
01:14
Part Replacement
Whirlpool Barracuda Refrigerator Top Liner LED Replacement WPW10515058
00:53
Part Replacement
Whirlpool Barracuda Refrigerator Meat Drawer Shelf Replacement W11223835
01:19
Part Replacement
Whirlpool Barracuda Refrigerator Crisper Shelf Frame Replacement W10914556
01:38
Part Replacement
Whirlpool Barracuda Refrigerator Beveled LED Replacement WPW10515057