In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Gas Range Oven Bottom Panel Replacement #WPW10211368 
Whirlpool Gas Range Oven Bottom Panel Replacement #WPW10211368
Skill Level
Total Parts Cost
$219.58Estimated Savings
$112.5003:01
- Description
This video provides step-by-step repair instructions for replacing the oven bottom panel on a Whirlpool gas range. The most common reason for replacing this part is if it is damaged or missing.
All of the information for this part replacement video is applicable to the following brands:
Whirlpool
All of the information for this part replacement video is applicable to the following brands:
Whirlpool
Step By Step Instructions
1
Whirlpool Gas Range - WFG745H0FS1
2
Gas Range Bottom Oven Panel Replacement
3
Tools needed: Phillips-head screwdriver
4
Shock Hazard
5
Be sure to unplug the power cord or shut off the power supply.
6
For easier access, we recommend removing the oven door by first rotating both door hinge locks back.
7
Heavy
8
Partially close the door, then lift and pull the door toward you to remove.
9
With the handle side down, set the door on a blanket or towel.
10
Remove the oven racks.
11
Use a Phillips-head screwdriver to unthread the two rear mounting screws securing the bottom panel.
12
Heavy
13
Lift the old panel up from the back to remove.
14
Prepare the new bottom oven panel for installation by transferring the baffle and diffuser from the old panel to the new one.
15
Now align the front edge of the bottom panel first, then lower the panel and thread the mounting screws.
16
Replace the oven racks.
17
Reinstall the oven door by inserting the door hinges into the hinge slots at a forty-five degree angle.
18
Lower the door to its fully open position, then rotate the hinge locks forward.
19
Plug the power cord back in or restore the power supply and the gas range should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the oven bottom panel on a Whirlpool gas range. The most common reason for replacing this part is if it is damaged or missing.
All of the information for this part replacement video is applicable to the following brands:
Whirlpool
All of the information for this part replacement video is applicable to the following brands:
Whirlpool
Step-By-Step Instructions
1
Whirlpool Gas Range - WFG745H0FS1
2
Gas Range Bottom Oven Panel Replacement
3
Tools needed: Phillips-head screwdriver
4
Shock Hazard
5
Be sure to unplug the power cord or shut off the power supply.
6
For easier access, we recommend removing the oven door by first rotating both door hinge locks back.
7
Heavy
8
Partially close the door, then lift and pull the door toward you to remove.
9
With the handle side down, set the door on a blanket or towel.
10
Remove the oven racks.
11
Use a Phillips-head screwdriver to unthread the two rear mounting screws securing the bottom panel.
12
Heavy
13
Lift the old panel up from the back to remove.
14
Prepare the new bottom oven panel for installation by transferring the baffle and diffuser from the old panel to the new one.
15
Now align the front edge of the bottom panel first, then lower the panel and thread the mounting screws.
16
Replace the oven racks.
17
Reinstall the oven door by inserting the door hinges into the hinge slots at a forty-five degree angle.
18
Lower the door to its fully open position, then rotate the hinge locks forward.
19
Plug the power cord back in or restore the power supply and the gas range should be ready for use.
Applicable Product Model
Related Articles & Videos
02:10
Part Replacement
Whirlpool Gas Range Oven Temperature Sensor Replacement #W10833885