In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenaid Double Oven Electric Range Right Rear Element Switch Replacement #WP7403P238-60
Kitchenaid Double Oven Electric Range Right Rear Element Switch Replacement #WP7403P238-60
Skill Level
Total Parts Cost
$59.13Estimated Savings
$112.5003:07
- Description
This video provides step-by-step instructions for replacing the right rear element switch on a Kitchenaid double oven electric range (model #KFED500ESS02). The most common reason for replacing the switch is if the right rear element will not work.
All of the information in this switch replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this switch replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step By Step Instructions
1
Double Oven Electric Range - Model KFED500ESS02
2
KitchenAid Double Oven Electric Range - Right Rear Element Switch Replacement
3
You will need phillips-head screwdriver or quarter-inch nut driver and a flat-head screwdriver to complete this repair.
4
Shock
5
Be sure to shut off the power supply to the outlet or junction box.
6
Pull the range away from the wall so you can access the rear of the appliance.
7
Use a phillips-head screwdriver or a quarter-inch nut driver to unthread the lower screws to release the upper rear access panel brace.
8
Sharp
9
Next, unthread the upper screws securing the panel.
10
Disconnect the wire connecter from the control board to fully release the panel.
11
Pull off the appropriate control knob, and use a phillips-head screwdriver to unthread the mounting screws securing the bezel and element switch.
12
Remove the old switch?note the location of the wires?then use a flat-head screwdriver to help detach the wire connecters.
13
Install the new surface element switch, by first connecting the wire connecters to the appropriate terminals.
14
Insert a screw through the top hole of the control knob bezel and align the bezel on the control panel.
15
Position the new switch, then thread and tighten the top screw.
16
Thread and tighten the bottom screw.
17
Replace the control knob on the switch stem.
18
Reinstall the upper rear access panel by first connecting the wire connecter to the control board.
19
Align the panel and replace the upper screws.
20
Realign the brace then thread the lower screws.
21
Restore power to the outlet or junction box.
Description
This video provides step-by-step instructions for replacing the right rear element switch on a Kitchenaid double oven electric range (model #KFED500ESS02). The most common reason for replacing the switch is if the right rear element will not work.
All of the information in this switch replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this switch replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step-By-Step Instructions
1
Double Oven Electric Range - Model KFED500ESS02
2
KitchenAid Double Oven Electric Range - Right Rear Element Switch Replacement
3
You will need phillips-head screwdriver or quarter-inch nut driver and a flat-head screwdriver to complete this repair.
4
Shock
5
Be sure to shut off the power supply to the outlet or junction box.
6
Pull the range away from the wall so you can access the rear of the appliance.
7
Use a phillips-head screwdriver or a quarter-inch nut driver to unthread the lower screws to release the upper rear access panel brace.
8
Sharp
9
Next, unthread the upper screws securing the panel.
10
Disconnect the wire connecter from the control board to fully release the panel.
11
Pull off the appropriate control knob, and use a phillips-head screwdriver to unthread the mounting screws securing the bezel and element switch.
12
Remove the old switch?note the location of the wires?then use a flat-head screwdriver to help detach the wire connecters.
13
Install the new surface element switch, by first connecting the wire connecters to the appropriate terminals.
14
Insert a screw through the top hole of the control knob bezel and align the bezel on the control panel.
15
Position the new switch, then thread and tighten the top screw.
16
Thread and tighten the bottom screw.
17
Replace the control knob on the switch stem.
18
Reinstall the upper rear access panel by first connecting the wire connecter to the control board.
19
Align the panel and replace the upper screws.
20
Realign the brace then thread the lower screws.
21
Restore power to the outlet or junction box.
Applicable Product Model
Parts Needed
Surface Element Switch
$59.13
Recommended Tools and Accessories
Cooktop Cleaner
$14.29
Total$0.00
Related Articles & Videos
05:40
Part Replacement
Kitchenaid Double Oven Electric Range Bake Element Replacement #WPW10249981
01:24
Part Replacement
Kitchenaid Double Oven Electric Range Control Knob Bezel Replacement #W10645811
03:29
Part Replacement
Kitchenaid Double Oven Electric Range Door Lock Assembly Replacement #W11166856
06:51
Part Replacement
Kitchenaid Double Oven Electric Range Door Handle Replacement #W10674701
00:31
Part Replacement
Kitchenaid Double Oven Electric Range Control Knob Replacement #W11230929