In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenaid Microwave Door Handle Replacement #W10831237 
Kitchenaid Microwave Door Handle Replacement #W10831237
Skill Level
Total Parts Cost
$114.16Estimated Savings
$112.5004:15
- Description
This video provides step-by-step repair instructions for replacing the door handle on a Kitchenaid microwave (Model #KMBP100ESS01). The most common reason for replacing the handle is if it is damaged or missing.
All of the information for this microwave door handle replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: multi-screwdriver
All of the information for this microwave door handle replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: multi-screwdriver
Step By Step Instructions
1
Microwave Oven -Model KMBP100ESS01
2
KitchenAid Built-In Microwave Oven Door Handle Assembly
3
ATTENTION: TOOLS & ASSISTANCE NEEDED:
4
"Step 1: You will need a Phillips-head screwdriver, a flat-head screwdriver, a paper clip, T-20 Torx bit, and 1/8th drill bit and drill. "
5
"Step 2: Before you begin, be sure to turn off the power supply to the oven junction box. "
6
Step 3: Open the oven door and use a 1/8th inch bit to drill out the rivet securing the sliding arm to the door.
7
Step 4: We recommend inserting a paper clip through the hole in the sliding arm to prevent it from sliding back through the frame.
8
Step 5: Now insert a flat-head screwdriver into each door hinge to hold the hinges in place.
9
Step 6: Use a T-20 Torx bit to unthread the two screws securing the door to the hinges.
10
Step 7: Slide the door off the hinges and set it on a sturdy surface with the handle side down.
11
Step 8: Use a small flat-head screwdriver to help remove the two screw hole plugs.
12
Step 9: Use a Phillips-head screwdriver to unthread the two screws securing the inner door panel to the outer door assembly.
13
Step 10: Lift of the panel and set it aside.
14
Step 11: Now unthread the screws securing the door handle to the outer door and remove the old handle.
15
Step 12: Install the new door handle by aligning it on the outer door panel then thread the screws to secure.
16
"Step 13: Realign the inner door panel, slide it up and secure it with the screws. "
17
Step 14: Snap the screw hole plugs.
18
Step 15: Slide the door assembly onto the hinges.
19
Step 16: Thread and tighten the screws to secure.
20
Step 17: Remove the screwdrivers as well as the paperclip from the sliding arm if applicable.
21
"Step 18: Align the sliding arm with the door anchor. If necessary, punch out the old rivet from the bushing. "
22
Step 19: Insert the bushing into the arm and secure with a new rivet.
23
Step 20: Turn on the power supply back on to the microwave.
24
Congrats! Your microwave oven is ready for use.
Description
This video provides step-by-step repair instructions for replacing the door handle on a Kitchenaid microwave (Model #KMBP100ESS01). The most common reason for replacing the handle is if it is damaged or missing.
All of the information for this microwave door handle replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: multi-screwdriver
All of the information for this microwave door handle replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: multi-screwdriver
Step-By-Step Instructions
1
Microwave Oven -Model KMBP100ESS01
2
KitchenAid Built-In Microwave Oven Door Handle Assembly
3
ATTENTION: TOOLS & ASSISTANCE NEEDED:
4
"Step 1: You will need a Phillips-head screwdriver, a flat-head screwdriver, a paper clip, T-20 Torx bit, and 1/8th drill bit and drill. "
5
"Step 2: Before you begin, be sure to turn off the power supply to the oven junction box. "
6
Step 3: Open the oven door and use a 1/8th inch bit to drill out the rivet securing the sliding arm to the door.
7
Step 4: We recommend inserting a paper clip through the hole in the sliding arm to prevent it from sliding back through the frame.
8
Step 5: Now insert a flat-head screwdriver into each door hinge to hold the hinges in place.
9
Step 6: Use a T-20 Torx bit to unthread the two screws securing the door to the hinges.
10
Step 7: Slide the door off the hinges and set it on a sturdy surface with the handle side down.
11
Step 8: Use a small flat-head screwdriver to help remove the two screw hole plugs.
12
Step 9: Use a Phillips-head screwdriver to unthread the two screws securing the inner door panel to the outer door assembly.
13
Step 10: Lift of the panel and set it aside.
14
Step 11: Now unthread the screws securing the door handle to the outer door and remove the old handle.
15
Step 12: Install the new door handle by aligning it on the outer door panel then thread the screws to secure.
16
"Step 13: Realign the inner door panel, slide it up and secure it with the screws. "
17
Step 14: Snap the screw hole plugs.
18
Step 15: Slide the door assembly onto the hinges.
19
Step 16: Thread and tighten the screws to secure.
20
Step 17: Remove the screwdrivers as well as the paperclip from the sliding arm if applicable.
21
"Step 18: Align the sliding arm with the door anchor. If necessary, punch out the old rivet from the bushing. "
22
Step 19: Insert the bushing into the arm and secure with a new rivet.
23
Step 20: Turn on the power supply back on to the microwave.
24
Congrats! Your microwave oven is ready for use.
Applicable Product Model
Related Articles & Videos