In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Front Load Washer Suspension Spring #W10365757
Whirlpool Front Load Washer Suspension Spring #W10365757
Skill Level
Total Parts Cost
$13.85Estimated Savings
$112.5003:15
- Description
This video provides step-by-step repair instructions for replacing the suspension spring on a Whirlpool front-load washer. The most common reason for replacing the suspension spring is if the washer is shaking or vibrating.
This suspension spring replacement video is applicable to the following brands:
Whirlpool, Maytag
Tools needed: quarter-inch socket or nut driver, ratchet strap
This suspension spring replacement video is applicable to the following brands:
Whirlpool, Maytag
Tools needed: quarter-inch socket or nut driver, ratchet strap
Step By Step Instructions
1
Before you replace the suspension spring in your washer be sure to unplug the power cord.
2
Use a quarter-inch socket or nut driver to unthread the rear screws securing the top panel.
3
Slide the top panel back and lift up to detach.
4
For better access to the left side suspension spring, you should remove the vent hose.
5
Use a ratchet strap to support the tub.
6
Remove the bushing and detach the old suspension spring from the support rail and the tub.
7
Prepare the new suspension spring for installation by applying some grease.
8
Now hook one end of the spring to the tub insert the opposite end through the support rail and reposition the bushing.
9
Repeat this procedure for the opposite spring.
10
Remove the support securing the tub.
11
Reinstall the vent hose if necessary.
12
Realign the top panel and slide it into position.
13
Secure the screws.
14
With the repair completed plug the power cord back in and your washer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the suspension spring on a Whirlpool front-load washer. The most common reason for replacing the suspension spring is if the washer is shaking or vibrating.
This suspension spring replacement video is applicable to the following brands:
Whirlpool, Maytag
Tools needed: quarter-inch socket or nut driver, ratchet strap
This suspension spring replacement video is applicable to the following brands:
Whirlpool, Maytag
Tools needed: quarter-inch socket or nut driver, ratchet strap
Step-By-Step Instructions
1
Before you replace the suspension spring in your washer be sure to unplug the power cord.
2
Use a quarter-inch socket or nut driver to unthread the rear screws securing the top panel.
3
Slide the top panel back and lift up to detach.
4
For better access to the left side suspension spring, you should remove the vent hose.
5
Use a ratchet strap to support the tub.
6
Remove the bushing and detach the old suspension spring from the support rail and the tub.
7
Prepare the new suspension spring for installation by applying some grease.
8
Now hook one end of the spring to the tub insert the opposite end through the support rail and reposition the bushing.
9
Repeat this procedure for the opposite spring.
10
Remove the support securing the tub.
11
Reinstall the vent hose if necessary.
12
Realign the top panel and slide it into position.
13
Secure the screws.
14
With the repair completed plug the power cord back in and your washer should be ready for use.
Related Articles & Videos