In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Gas Range Rear Leveling Leg Replacement #W10058460
Whirlpool Gas Range Rear Leveling Leg Replacement #W10058460
Skill Level
Total Parts Cost
$6.56Estimated Savings
$112.5001:31
- Description
This video provides step-by-step repair instructions for replacing the rear leveling leg on a Whirlpool gas range. The most common reason for replacing the leg is if it is broken and the range is off-balance.
All of the information for this leveling leg replacement video is applicable to the following brands:
Kenmore, Frigidaire, Amana, Crosley, Estate, Magic Chef, Maytag, Roper
Tools needed: none
All of the information for this leveling leg replacement video is applicable to the following brands:
Kenmore, Frigidaire, Amana, Crosley, Estate, Magic Chef, Maytag, Roper
Tools needed: none
Step By Step Instructions
1
To replace a rear leveling leg on your range carefully lift the range up and support it with a wood block or a comparable sturdy object.
2
Now use channel-lock pliers to help unthread the old leg from the base.
3
Install the new leveling leg by threading it into the base until the foot is flush against it.
4
Remove the support.
5
Determine if the range is level.
6
If it isn’t support the range and adjust the leg.
7
Repeat this procedure until you can confirm that the range is level and ready for use.
Description
This video provides step-by-step repair instructions for replacing the rear leveling leg on a Whirlpool gas range. The most common reason for replacing the leg is if it is broken and the range is off-balance.
All of the information for this leveling leg replacement video is applicable to the following brands:
Kenmore, Frigidaire, Amana, Crosley, Estate, Magic Chef, Maytag, Roper
Tools needed: none
All of the information for this leveling leg replacement video is applicable to the following brands:
Kenmore, Frigidaire, Amana, Crosley, Estate, Magic Chef, Maytag, Roper
Tools needed: none
Step-By-Step Instructions
1
To replace a rear leveling leg on your range carefully lift the range up and support it with a wood block or a comparable sturdy object.
2
Now use channel-lock pliers to help unthread the old leg from the base.
3
Install the new leveling leg by threading it into the base until the foot is flush against it.
4
Remove the support.
5
Determine if the range is level.
6
If it isn’t support the range and adjust the leg.
7
Repeat this procedure until you can confirm that the range is level and ready for use.
Applicable Product Model
Parts Needed
Leveling Leg
$6.56
Total$0.00
Related Articles & Videos
01:42
Part Replacement
Kitchenaid Electric Slide-In Range Rear Foot Replacement #WPW10058460