In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairMaytag Dishwasher Water Inlet Valve Replacement #99001359
Maytag Dishwasher Water Inlet Valve Replacement #99001359
Skill Level
Total Parts Cost
$61.31Estimated Savings
$112.5002:51
- Description
This video provides step-by-step instructions for replacing the water inlet valve on Maytag dishwashers. The most common reasons for replacing the inlet valve are when the dishwasher won’t fill, fills slowly, overflows, leaks, makes a loud noise, stops mid-cycle, or doesn’t clean.
All of the information in this inlet valve replacement video is applicable to the following brands: Maytag, Jenn Air, Amana, Crosley, Magic Chef, Kenmore, Admiral
Tools used: nutdriver, wrench
All of the information in this inlet valve replacement video is applicable to the following brands: Maytag, Jenn Air, Amana, Crosley, Magic Chef, Kenmore, Admiral
Tools used: nutdriver, wrench
Step By Step Instructions
1
Before you begin, be sure to turn off the power supply to your dishwasher
2
Shut off the water supply valve.
3
Your first step is to remove the screws to release the lower access panels.
4
Next, disconnect the water supply line from the old inlet valve.
5
Be prepared for some water to spill out.
6
Now, use a wrench to help remove the brass elbow from the old valve.
7
Remove the mounting screw and slide the old valve out of the frame.
8
Disconnect the wires.
9
Release the clamp and detach the water hose. Again, be prepared for some water to spill.
10
Install the new water inlet valve by first attaching the hose and securing the clamp.
11
Reconnect the wires.
12
Slide the new valve into the frame and secure with the mounting screw.
13
Wrap Teflon tape clockwise around the threads of the brass elbow and secure it to the new valve.
14
Tighten with the wrench.
15
Reconnect the water supply line and turn the water supply back on to test for leaks.
16
If no leaks are visible, replace the lower access panels and secure the screws.
17
You’re now ready to restore power to your dishwasher to make sure it’s functioning properly.
Description
This video provides step-by-step instructions for replacing the water inlet valve on Maytag dishwashers. The most common reasons for replacing the inlet valve are when the dishwasher won’t fill, fills slowly, overflows, leaks, makes a loud noise, stops mid-cycle, or doesn’t clean.
All of the information in this inlet valve replacement video is applicable to the following brands: Maytag, Jenn Air, Amana, Crosley, Magic Chef, Kenmore, Admiral
Tools used: nutdriver, wrench
All of the information in this inlet valve replacement video is applicable to the following brands: Maytag, Jenn Air, Amana, Crosley, Magic Chef, Kenmore, Admiral
Tools used: nutdriver, wrench
Step-By-Step Instructions
1
Before you begin, be sure to turn off the power supply to your dishwasher
2
Shut off the water supply valve.
3
Your first step is to remove the screws to release the lower access panels.
4
Next, disconnect the water supply line from the old inlet valve.
5
Be prepared for some water to spill out.
6
Now, use a wrench to help remove the brass elbow from the old valve.
7
Remove the mounting screw and slide the old valve out of the frame.
8
Disconnect the wires.
9
Release the clamp and detach the water hose. Again, be prepared for some water to spill.
10
Install the new water inlet valve by first attaching the hose and securing the clamp.
11
Reconnect the wires.
12
Slide the new valve into the frame and secure with the mounting screw.
13
Wrap Teflon tape clockwise around the threads of the brass elbow and secure it to the new valve.
14
Tighten with the wrench.
15
Reconnect the water supply line and turn the water supply back on to test for leaks.
16
If no leaks are visible, replace the lower access panels and secure the screws.
17
You’re now ready to restore power to your dishwasher to make sure it’s functioning properly.
Applicable Product Model
Related Articles & Videos